• Adjustable 3-Terminal Negative Voltage Regulator
• Output Voltage Range: From -1.25V to -37V
• Maximum Output Current: -1.5A
• Differential Input and Output Voltage: 40V (Max), recommended 15V

Enhance your electronic circuits with the KBPC5010 Bridge Rectifier. Key features include:

• High case dielectric strength
• High surge current capability
• High reliability and efficiency
• Low reverse current and forward voltage drop
• Pb / RoHS Free
• Maximum average forward current: 50A
• Maximum forward voltage per diode: 1.1V at 25A
• Maximum DC reverse current: 10µA
• Maximum recurrent peak reverse voltage: 1000V
• Maximum RMS voltage: 700V
• Maximum DC blocking voltage: 1000V

Ideal for converting AC to DC in power supplies and other electronic applications.

Key Features:

• 16A current rating
• 35mA gate trigger current
• 600V off-state voltage rating
• Snubberless design
• Available in D2PAK package

The CD4066BE is a high-performance quad bilateral switch IC designed for the transmission or multiplexing of analog or digital signals. Key features include:

• Pin-for-pin compatible with CD4016B
• Lower on-state resistance
• Four bilateral switches with independent controls

Ideal for analog and digital signal applications.

Product Overview: The 74139/74HC139/74LS139 Dual 2-4 Line Decoder/Demux IC is a high-efficiency integrated circuit designed for decoding and demultiplexing applications in digital systems.

Key Features:

• Type: Decoder/Demultiplexer
• Circuit: 1 x 2:4
• Independent Circuits: 2
• Current - Output High, Low: 5.2mA, 5.2mA
• Voltage Supply: 2 V ~ 6 V
• Operating Temperature: -55°C ~ 125°C
• Package: 16-PDIP
• Mounting Type: Through Hole
• Supplier: SICSTOCK

• 32-Pin Package: Compact design with 32 pins for flexible integration.
• High Memory Capacity: 32KB Flash, 2KB SRAM, and 1KB EEPROM.
• Multiple I/O Lines: 23 General-purpose I/O lines for versatile connectivity.
• Analog and Digital Processing: 10-bit ADC with 8 channels for accurate analog signal processing.

The Audio Power Amplifier LA4508 is a high-performance dual channel stereo amplifier designed for various audio applications. It features:

• Output Power: 8.5W
• Supply Voltage Range: 9 – 12V
• Output Impedance: 8 Ohm
• Package Type: ZIP-14
• Number of Channels: 2
• 14-pin configuration
• Dimensions: 36.5x14x4.5mm
• Weight: approx. 6.87gm

• Dual JK flip-flop package with positive edge triggering.
• Supports fast operation with 16 ns input rise time and 25 ns input fall time.
• Compatible with TTL logic levels.
• Operates at a voltage range of 4.5V to 5.5V.

• 20 Pin DIP package for easy integration.
• Eight D-type flip-flops with a common clock.
• Edge-triggered for reliable operation.
• Parallel In and Out functionality.

The TL084 is part of the TL08x family of JFET-input operational amplifiers, designed for high performance with low power consumption. It features high slew rates, low input bias and offset currents, and a wide common-mode and differential voltage range. This makes it ideal for a variety of applications, including audio processing and signal amplification.

The LM317T adjustable positive voltage regulator can supply up to 1.5A over an output range of 1.2V to 37V. Easy to use with just two external resistors required, it offers superior line and load regulation compared to standard fixed regulators.

• Output Current: Up to 1.5A
• Output Voltage Range: 1.2V to 37V
• Requires only two external resistors to set output voltage
• Superior line and load regulation
• Full overload protection: current limit and thermal overload protection

The ICL-7660 CMOS Voltage Converter offers simple conversion of +5V to ±5V supplies with a wide supply range from 1.5V to 10V. It's designed for simple voltage multiplication and boasts a typical open circuit conversion efficiency of 99.9%. This IC requires minimal external components, making it an efficient and effective solution for your voltage conversion needs.

Key Features:

• Simple Conversion of +5V to ±5V Supplies
• Simple Voltage Multiplication
• Typical Open Circuit Conversion Efficiency 99.9%
• Wide Supply Range 1.5V to 10V
• Minimal External Components Required

The ULN2804 is a Darlington transistor array containing eight transistors with common emitters and integral suppression diodes for inductive loads. Each transistor can handle a peak load current of 600mA (500mA continuous) and withstand up to 50V in the off state. It is designed for high-current, high-voltage applications and can be used with various logic families.

• Wide supply voltage range (6V - 18V)
• Stand-by & mute functions
• Minimum external components required
• No SVR capacitor, no bootstrap, no Boucherot cells

• Operates at high voltage up to 20V.
• Combines both counter and decoding functions in a single IC.
• Ideal for low power displays.

The IC Base 18-Pin Socket Connector offers reliable connectivity and secure placement for integrated circuits. Ideal for various electronic projects, it features a robust design and precise pin alignment.