• Integrated off-line switcher with programmable over-voltage protection (OVP)
• Part of the TOPSwitch®-HXr series from Power Integrations
• High efficiency, compact design for space-saving
• Suitable for use in power supplies, adapters, and battery chargers

• 64K Memory, 8k x 8 bits
• Two-Wire Serial Interface (I2C)
• Write Protect Pin for Hardware Data Protection

CD4013 Dual D-Type Flip-Flops

The CD4013 is a versatile dual D-type flip-flop IC with asynchronous set-reset capability and static flip-flop operation. Ideal for medium-speed applications, it features standardized symmetrical output characteristics. Key features include:

• Asynchronous set-reset capability
• Static flip-flop operation
• Medium-speed operation: 16 MHz clock toggle rate at 10-V supply
• Standardized symmetrical output characteristics
• Maximum input current of 1-µA at 18V over full package temperature range
• Noise margin: 1V at VDD = 5V, 2V at VDD = 10V, 2.5V at VDD = 15V

• RoHS compliant
• Step-down voltage regulator
• Wide input voltage range (5V~32V)

• High-performance Quad 2-input NOR Gate IC
• Wide supply voltage range: 3V to 15V
• Reliable operation over a broad temperature range: -55°C to +125°C
• Durable PDIP-14 package for secure mounting

• 14-bit binary counter/divider.
• Wide operating voltage range (3V to 18V).
• High clock frequency capability (up to 30MHz at 15V).
• Fast reset propagation delay of 25ns at 5V.

Enhance your electronic circuits with the KBPC5010 Bridge Rectifier. Key features include:

• High case dielectric strength
• High surge current capability
• High reliability and efficiency
• Low reverse current and forward voltage drop
• Pb / RoHS Free
• Maximum average forward current: 50A
• Maximum forward voltage per diode: 1.1V at 25A
• Maximum DC reverse current: 10µA
• Maximum recurrent peak reverse voltage: 1000V
• Maximum RMS voltage: 700V
• Maximum DC blocking voltage: 1000V

Ideal for converting AC to DC in power supplies and other electronic applications.

• Active product status for reliable application
• NAND Gate logic type with 2 circuits
• 4 input channels per circuit
• Wide supply voltage range: 3V to 18V

• 32K Memory, 4k x 8 bits
• Two-Wire Serial Interface (I2C)
• Write Protect Pin for Hardware Data Protection

The 6N136 Optocoupler is a high-performance component designed for electrical isolation and signal transmission. With a voltage isolation of 2500Vrms and a current transfer ratio ranging from 19% to 50%, it ensures reliable performance. This optocoupler comes in an 8-DIP package for through hole mounting.

Key Features:

• Part NO.: 6N136V
• Package: 8-DIP (0.300, 7.62mm)
• Number of Channels: 1
• Input Type: DC
• Voltage - Isolation: 2500Vrms
• Current Transfer Ratio (Min): 19% @ 16mA
• Current Transfer Ratio (Max): 50% @ 16mA
• Voltage - Output: -0.5 ~ 20V
• Current - Output / Channel: 8mA
• Current - DC Forward (If): 25mA
• Mounting Type: Through Hole

Supplier: SICSTOCK

• Six independent hex buffer gates
• Open collector outputs require pull-up resistors
• Open collector type suitable for indicator lamps and relays
• Input clamping diodes

• High-Speed CMOS Decoder/Demultiplexer
• Single Supply Voltage: Operates between 2V to 6V
• 3-to-8 Line Decoder for Address Expansion
• Low Power Consumption with CMOS Technology

• High-performance 4-to-10 line decoder/demultiplexer
• Single supply voltage operation ranging from 3V to 18V
• High current drive capability: 6.8mA (output high/low)
• Wide operating temperature range: -55°C to 125°C

• Two Independent JK Flip-Flops with Clock and Clear Inputs.
• Fast Switching Times for high-speed logic operations.
• Standard Pin Arrangement for easy circuit integration.
• Standard TTL Switching Voltages for compatibility with digital circuits.

• Output Current: Provides 1A output current for various applications.
• Fixed Output Voltage: Delivers a 15V fixed output voltage.
• Thermal Overload Protection: Features thermal overload protection for safe operation.

• Adjustable output voltage
• Wide input voltage range (up to 45V)
• Stable and efficient step-down voltage conversion
• Overvoltage and overload protection