• Integrated off-line switcher with programmable over-voltage protection (OVP)
• Part of the TOPSwitch®-HXr series from Power Integrations
• High efficiency, compact design for space-saving
• Suitable for use in power supplies, adapters, and battery chargers

The IC Base 16-Pin is a high-quality socket designed for integrated circuits. This IC base features a row-to-row distance of 7.62mm, a pin pitch of 2.54mm, and a pin length of 4mm. Its compact dimensions of 20.5mm (L) x 10mm (W) x 5mm (H) make it perfect for various electronic projects and applications.

• Row to Row Distance: 7.62mm
• Number of Pins: 16
• Pin Pitch: 2.54mm
• Pin Length: 4mm
• Dimensions: 20.5mm (L) x 10mm (W) x 5mm (H)

• 32K Memory, 4k x 8 bits
• Two-Wire Serial Interface (I2C)
• Write Protect Pin for Hardware Data Protection

CD4013 Dual D-Type Flip-Flops

The CD4013 is a versatile dual D-type flip-flop IC with asynchronous set-reset capability and static flip-flop operation. Ideal for medium-speed applications, it features standardized symmetrical output characteristics. Key features include:

• Asynchronous set-reset capability
• Static flip-flop operation
• Medium-speed operation: 16 MHz clock toggle rate at 10-V supply
• Standardized symmetrical output characteristics
• Maximum input current of 1-µA at 18V over full package temperature range
• Noise margin: 1V at VDD = 5V, 2V at VDD = 10V, 2.5V at VDD = 15V

HCF4094B Shift and Store Bus Register

The HCF4094B Shift and Store Bus Register is designed for medium-speed operation, making it ideal for various electronic applications. Its 3-state parallel outputs, synchronous serial outputs, and quiescent current specifications ensure reliable performance.

• 3-state parallel outputs for connection to common bus
• Separate serial outputs synchronous to both positive and negative clock edges for cascading
• Medium speed operation 5 MHz at 10 V
• Quiescent current specified up to 20 V
• Standardized symmetrical output characteristics
• 5 V, 10 V, and 15 V parametric ratings
• Input leakage current II = 100 nA (max.) at VDD = 18 V, TA = 25 °C
• 100% tested for quiescent current
• ESD performance: HBM: 1 kV, MM: 200 V, CDM: 1 kV

DS1307 Real-Time Clock Module

The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock and calendar module that includes 56 bytes of NV SRAM. Perfect for applications needing precise timekeeping and calendar functionality, this module transfers address and data serially through an I2C, bidirectional bus. Key features include:

• Low-power, binary-coded decimal (BCD) clock/calendar
• 56 bytes of NV SRAM
• I2C, bidirectional bus for data transfer
• Reliable and accurate timekeeping

• Output Current: Provides up to 1A output current.
• Fixed Output Voltage: Stable 8V output voltage for reliable power supply.
• Thermal Overload Protection: Built-in thermal overload protection for safe operation.

• 4K Memory, 512 x 8 bits
• Two-Wire Serial Interface
• Write Protect Pin for Hardware Data Protection
• Wide Supply Voltage 2.7V to 5.5V

The CD4066BE is a high-performance quad bilateral switch IC designed for the transmission or multiplexing of analog or digital signals. Key features include:

• Pin-for-pin compatible with CD4016B
• Lower on-state resistance
• Four bilateral switches with independent controls

Ideal for analog and digital signal applications.

Enhance your electronic circuits with the KBPC5010 Bridge Rectifier. Key features include:

• High case dielectric strength
• High surge current capability
• High reliability and efficiency
• Low reverse current and forward voltage drop
• Pb / RoHS Free
• Maximum average forward current: 50A
• Maximum forward voltage per diode: 1.1V at 25A
• Maximum DC reverse current: 10µA
• Maximum recurrent peak reverse voltage: 1000V
• Maximum RMS voltage: 700V
• Maximum DC blocking voltage: 1000V

Ideal for converting AC to DC in power supplies and other electronic applications.

LM358 Op-Amp (Through-Hole)

The LM358 is a low-power dual operational amplifier with high efficiency and reliability. It features two internally compensated op-amps, making it ideal for a wide range of applications. Key features include:

• Two internally compensated op-amps
• Large DC voltage gain: 100 dB
• Wide bandwidth (unity gain): 1 MHz (temperature compensated)
• Wide power supply range: Single supply 3V to 32V, or dual supplies +/-1.5V to +/-16V

• Multifunction capability for versatile use in different applications.
• Mutually exclusive outputs for more efficient circuit design.
• Demultiplexing capability for handling multiple signal channels.
• Input clamp diodes to limit high-speed termination effects.

The TDA2030 14 Watts Hi-Fi Audio Amplifier is a class AB amplifier designed for high-fidelity audio applications. Key features include:

• Class AB amplifier with low frequency
• Operates with both single (12V to 36V) and split (± 6V to ± 18V) power supplies
• High output current
• Protection against short circuits and excess temperature
• Very low harmonic and cross-over distortion
• Output power: 14W at 4Ω and 9W at 8Ω

• Zero-Crossing Detection: Provides zero-crossing detection for efficient switching.
• Optoisolator: Acts as an optical isolator to isolate the high-voltage side from the low-voltage side.
• Triac Driver: Specifically designed to drive Triac for AC load switching applications.

The STK465 is a Hybrid IC made by Sanyo Corporation, ideal for building stereo amplifiers. This 16-pin IMST Hybrid IC provides a maximum output of 30 watts per channel, with a recommended supply voltage of ±28V and a load resistance of 8Ω.

• Hybrid IC for stereo amplifiers
• Maximum Output: 30W per channel
• Supply Voltage: ±28V (Recommended)
• Load Resistance: 8Ω
• Package: 16-pin 4016

Key Features of AUPO Square Thermal Fuse 135°C, 2A 250V

• High-temperature rating: 135°C
• Current capacity: 2A
• Voltage rating: 250V
• Reliable AUPO brand
• Compact square design