• Adjustable 3-terminal positive voltage regulator
• Output voltage range: 1.25V to 33V
• Maximum output current: 3A
• Maximum input-output voltage difference: 35V (recommended 15V)

• 3-STATE version of 74LS153 with the same pinout.
• Schottky-diode-clamped transistors.
• Allows multiplexing from N-lines to one line.
• Performs parallel-to-serial conversion.

The LM324 is a versatile quad operational amplifier consisting of four independent, high-gain, internally frequency-compensated op-amps. These op-amps are designed to operate from a single power supply over a wide range of voltages, making them suitable for various applications. They can also operate from split power supplies, and the low power supply current drain is independent of the magnitude of the power supply voltage.

CD4051 Single 8-Channel Multiplexer/Demultiplexer

The CD4051 8-Channel Multiplexer/Demultiplexer is a versatile and efficient IC, perfect for both digital and analog signal switching. With low "ON" resistance and high "OFF" resistance, it ensures reliable performance across various applications. Key features include:

• Wide range of signal levels: digital 3 – 15V, analog up to 15Vp-p
• Low "ON" resistance: 80Ω (typ.)
• High "OFF" resistance with minimal leakage: ±10 pA (typ.)
• Logic level conversion for digital addressing signals
• Matched switch characteristics for consistency
• Very low quiescent power dissipation
• Binary address decoding on chip

The IC Base 18-Pin Socket Connector offers reliable connectivity and secure placement for integrated circuits. Ideal for various electronic projects, it features a robust design and precise pin alignment.

• High Output Power:
  • Stereo Mode: 2.3W (Typ) at 9V, 4Ω Load
  • Bridge Mode: 4.7W (Typ) at 9V, 8Ω Load
• Low switching distortion at high frequencies
• Built-in muting circuit minimizes power on/off noise

• Low Voltage Operation: Supports 2.7V to 5.5V (Standard Voltage) and 1.8V to 3.6V (Low Voltage)
• Memory Size: 256K bits, organized as 16,384 x 8 or 32,768 x 8
• Data Transfer: Two-wire serial interface for easy integration

• Noise Suppression: Schmitt Trigger, filtered inputs to reduce noise

• DC supply voltage range from -0.5V to 7V.
• Wide temperature range: -55°C to 125°C.
• Demultiplexing capability for flexible signal routing.
• Multiple input enable for easy expansion.

The 1508 Rectifier Bridge 15A 1000V is designed for efficient AC to DC conversion in various electronic applications. This single-phase bridge rectifier offers high current handling and reliable performance, making it suitable for industrial and consumer equipment.

• Mounting Style: Through Hole
• Reverse Voltage (Vr): 700V
• Forward Current (If): 15A
• Peak Reverse Voltage: 1000V
• Forward Voltage (Vf): 1.05V
• Package: GBJ

• Output Current: Provides 1A output current for various applications.
• Fixed Output Voltage: Delivers a 18V fixed output voltage.
• Thermal Overload Protection: Features thermal overload protection for safe operation.

The CD4081 Quad 2-Input AND Gate is an efficient component designed for reliable logic operations. It offers medium-speed operation with standardized, symmetrical output characteristics. Key features include:

• Medium-Speed Operation: t_PLH, t_PHL = 60 ns (typ.) at V_DD = 10 V
• 100% tested for quiescent current at 20 V
• Maximum input current of 1 µA at 18 V
• Noise margin up to 2.5 V at V_DD = 15 V
• Standardized, symmetrical output characteristics
• Parametric ratings at 5 V, 10 V, and 15 V

The ULN2804 is a Darlington transistor array containing eight transistors with common emitters and integral suppression diodes for inductive loads. Each transistor can handle a peak load current of 600mA (500mA continuous) and withstand up to 50V in the off state. It is designed for high-current, high-voltage applications and can be used with various logic families.

MCP23S17 16-Bit I/O Expander with SPI Interface

The MCP23S17 is a versatile 16-bit input/output port expander, featuring an SPI interface and interrupt output capabilities. It is perfect for expanding GPIO on microcontrollers and processors. Key features include:

• 16-bit input/output port expander with interrupt output
• Cascadable for up to 8 devices on one bus
• 25mA sink/source capability per I/O
• Supports up to 10MHz SPI clock speeds

• Output Voltage: Fixed at 3.3V
• Output Current: Capable of supplying 1A
• Low Dropout Voltage: Operates with a dropout voltage as low as 1V
• Line Regulation: 0.2% Max

The CD4070 is a quad Exclusive-OR (EX-OR) gate integrated circuit (IC) designed for a wide range of digital logic applications. Each IC contains four independent EX-OR gates, making it an essential component for systems requiring logical comparisons, parity checkers, and more. Manufactured by Harris, this IC belongs to the standard 'B' series CMOS family, delivering reliable performance across a variety of voltage levels and environmental conditions.

CD4013 Dual D-Type Flip-Flops

The CD4013 is a versatile dual D-type flip-flop IC with asynchronous set-reset capability and static flip-flop operation. Ideal for medium-speed applications, it features standardized symmetrical output characteristics. Key features include:

• Asynchronous set-reset capability
• Static flip-flop operation
• Medium-speed operation: 16 MHz clock toggle rate at 10-V supply
• Standardized symmetrical output characteristics
• Maximum input current of 1-µA at 18V over full package temperature range
• Noise margin: 1V at VDD = 5V, 2V at VDD = 10V, 2.5V at VDD = 15V