• 4-bit binary full adder with fast carry.
• High-speed performance.
• Suitable for various arithmetic and digital circuit applications.

The CD4017 is a high-speed CMOS decade counter IC with 16 pins, designed for counting applications. It can sequentially turn on 10 outputs in a predefined time, reset the count, or hold it as needed. This IC is ideal for LED chasers and other logical output projects, offering a wide supply voltage range and TTL compatibility.

• Core Architecture: AVR 8-bit
• Max Frequency: 10 MHz
• Data Bus Width: 8 bits
• Memory Size:
  • Flash Memory: 8 kB
  • EEPROM Memory: 64 bytes

• 2K Memory, 256 x 8 bits or 128 x 16 bits
• Three-Wire Serial Interface
• Self-Timed ERASE and WRITE Cycles

The 74LS48 is a BCD to 7-segment decoder/driver IC designed for converting binary-coded decimal (BCD) input into signals to drive a 7-segment display. It operates within a supply voltage range of 4.75V to 5.25V and is suitable for various digital display applications.

The 7495 / 74HC95 / 74LS95 is a high-speed CMOS 8-bit shift register with integrated output latches and 3-state outputs, designed for use in various digital and logic control applications. This IC is fabricated using advanced silicon gate C2MOS technology, offering fast operation, efficient power management, and protection against static discharge and voltage transients. With its dual clocking system and ability to cascade, it is ideal for data storage, transfer, and serial-to-parallel conversion tasks.

Introducing the 74HC595 8-bit Serial-to-Parallel Shift Register, an essential component for expanding I/O capabilities in electronic circuits. With a wide operating voltage range of 2V to 6V and high-current 3-state outputs, it can drive up to 15 LSTTL loads. This shift register ensures low power consumption with only 80μA, and offers a ±6mA output drive at 5V.

Key Features:

• 8-Bit Serial-In, Parallel-Out Shift
• Wide Operating Voltage Range: 2V to 6V
• High-Current 3-State Outputs
• Can Drive Up to 15 LSTTL Loads
• Low Power Consumption: 80μA
• ±6mA Output Drive at 5V

• Triple 3-input NAND gate for digital logic applications
• Operates at a typical voltage of 5V
• TTL-compatible for easy integration
• High-speed CMOS technology

• Function: Counter
• 4 Bits
• Technology Family: HC
• Input Type: Standard CMOS

• 13-Input NAND Gate with TTL logic compatibility.
• Low Power Consumption with LS (Low Power Schottky) technology.
• Fast Switching Time, ensuring high-speed logic operations.
• High Noise Immunity, making it reliable for digital circuits.

The CD4050 Hex Buffer Converter is a versatile component designed for various logic level conversion and buffering applications. It offers a wide supply voltage range and high current capability. Key features include:

• Wide supply voltage range: 3.0V to 15V
• Direct drive to 2 TTL loads at 5.0V over full temperature range
• High source and sink current capability
• Special input protection permits input voltages greater than VDD

• Low Voltage and Standard-Voltage Operation
• 2-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression

The LM 7812 Voltage Regulator is a reliable three-terminal positive regulator with a fixed 12V output. It features internal current limiting, thermal shut-down control, and safe area protection, making it an ideal choice for your electronic projects.

Key Features:

• Output Voltage: 12V
• Output Current: 1.5A
• Thermal Overload Protection
• Short Circuit Protection
• Output Transition SOA Protection

The CD4027 Dual JK Master-Slave Flip-Flop is a reliable component for robust logic operations. It offers a wide supply voltage range and high noise immunity. Key features include:

• Wide supply voltage range: 3.0V to 15V
• High noise immunity: 0.45 V_DD (typ.)
• Low power TTL compatibility: Fan out of 2 driving 74L or 1 driving 74LS
• Low power consumption: 50 nW (typ.)
• Medium speed operation: 12 MHz (typ.) with 10V supply
• Thru-Hole Device

• High-performance Quad 2-input NOR Gate IC
• Wide supply voltage range: 3V to 15V
• Reliable operation over a broad temperature range: -55°C to +125°C
• Durable PDIP-14 package for secure mounting

• Complies with JEDEC standard no. 7A
• CMOS input levels
• Synchronous reversible counting
• Asynchronous parallel load

• 4-bit binary full adder with fast carry.
• High-speed performance.
• Suitable for various arithmetic and digital circuit applications.

The CD4017 is a high-speed CMOS decade counter IC with 16 pins, designed for counting applications. It can sequentially turn on 10 outputs in a predefined time, reset the count, or hold it as needed. This IC is ideal for LED chasers and other logical output projects, offering a wide supply voltage range and TTL compatibility.

• Core Architecture: AVR 8-bit
• Max Frequency: 10 MHz
• Data Bus Width: 8 bits
• Memory Size:
  • Flash Memory: 8 kB
  • EEPROM Memory: 64 bytes

• 2K Memory, 256 x 8 bits or 128 x 16 bits
• Three-Wire Serial Interface
• Self-Timed ERASE and WRITE Cycles

The 74LS48 is a BCD to 7-segment decoder/driver IC designed for converting binary-coded decimal (BCD) input into signals to drive a 7-segment display. It operates within a supply voltage range of 4.75V to 5.25V and is suitable for various digital display applications.