Integrated Circuits (IC)

• High-Speed Performance: Propagation delay of approximately 20 ns.
• Multiple Input Channels: Eight data inputs with a single tri-state output.
• Versatile Package Types: Available in DIP/SOP, accommodating different project needs.
• Wide Operating Range: Operates within a 4.75V to 5.25V supply voltage.

Specifications:

• Technology: Si    
• Mounting Style: SMD/SMT    
• Package/Case: TO-263-7    
• Transistor Polarity: N-Channel    
• Number of Channels:1 Channel    
• Vds - Drain-Source Breakdown Voltage: 30 V    
• Id - Continuous Drain Current:180 A    
• Rds On - Drain-Source Resistance: 1.05 mOhms    
• Vgs - Gate-Source Voltage: - 16 V, + 16 V    
• Vgs th - Gate-Source Threshold Voltage: 1.5 V    
• Qg - Gate Charge: 187 nC    
• Minimum Operating Temperature: - 55 C    
• Maximum Operating Temperature: + 175 C    
• Pd - Power Dissipation: 188 W    
• Channel Mode:Enhancement    
• Qualification: AEC-Q101    
• Tradename: OptiMOS    
• Series: OptiMOS-T2    
• Packaging: Reel    
• Height: 4.4 mm    
• Length:10 mm    
• Product Type:  MOSFET   
• Rise Time: 5 ns    

Package:

1x 4N03L01 IPB180N03S4L-01 TO-263-7 30V 180A SMD Triode

• High-quality original brand amplifier IC.
• RoHS compliant and lead-free for environmental safety.
• Wide operating voltage range for versatile applications.
• Compact HYB package design for efficient mounting.

• Factory calibrated to ±1% for precise performance.
• Software selectable frequency range from 8 MHz to 32 kHz.
• Fail-safe clock monitoring for critical applications.
• Low-power operation with clock mode switching.

The MT8870D/MT8870D-1 is a complete DTMF receiver that integrates both the bandsplit filter and digital decoder functions. It uses switched capacitor techniques for high and low group filters and digital counting techniques to detect and decode all 16 DTMF tone pairs into a 4-bit code. The external component count is minimized by the on-chip provision of a differential input amplifier, clock oscillator, and latched three-state bus interface.

The LM324 is a versatile quad operational amplifier consisting of four independent, high-gain, internally frequency-compensated op-amps. These op-amps are designed to operate from a single power supply over a wide range of voltages, making them suitable for various applications. They can also operate from split power supplies, and the low power supply current drain is independent of the magnitude of the power supply voltage.

The NE555 is a versatile single precision timer IC widely used in various electronic circuits. It is known for its reliability and ease of use, making it a popular choice for both hobbyists and professionals. Here are some key specifications and features of the NE555:

The CD4070 is a quad Exclusive-OR (EX-OR) gate integrated circuit (IC) designed for a wide range of digital logic applications. Each IC contains four independent EX-OR gates, making it an essential component for systems requiring logical comparisons, parity checkers, and more. Manufactured by Harris, this IC belongs to the standard 'B' series CMOS family, delivering reliable performance across a variety of voltage levels and environmental conditions.

• Logic Type: 8-bit shift register, ideal for serial and parallel data applications
• Wide voltage range compatibility from 2V to 6V
• Reliable performance in extreme temperatures (-40°C to 125°C)
• Versatile function: parallel or serial to serial data conversion

• High precision and stability timing capability
• Operates in Astable and Monostable modes
• Wide range of operating voltages up to 18V
• TTL-compatible output for easy integration

• Contains a divide-by-two section and a divide-by-eight section
• Sections can be combined to form BCD, modulo-12, or modulo-16 counters
• Low power dissipation
• Operating temperature up to 70°C

• Low power consumption with a max supply current of just 1.3 mA.
• Very low input offset voltage of 50 μV, ensuring high precision.
• High bandwidth of 120 kHz for accurate signal amplification.
• Low input offset drift of 0.6 μV/°C for stable performance.

Discover the NE5532 Low Noise Dual Op-Amp. Featuring:

• Dual Op-Amps with Internal Frequency Compensation
• Input Offset Voltage: 0.5 mV
• Input Offset Current: 10 nA
• Supply Current: 6.0 mA
• High Common Mode Rejection: 100 dB
• Supply Voltage: ±22V

Discover the L298 Dual Full-Bridge Driver IC, designed to control motors and inductive loads in various electronic applications in Bangladesh. With an operating voltage range of +5V to +46V and maximum supply voltage of 50V, this IC ensures reliable performance and efficiency.

The UTC TDA2822 is a versatile monolithic integrated audio amplifier housed in an 8-pin plastic dual in-line package. Designed for portable cassette players and radios, it operates over a wide voltage range and features low crossover distortion, low quiescent current, and both bridge and stereo configurations.

The 74LS157 is a high-speed Quad 2-Input Multiplexer IC, designed for use in data selection and signal routing in digital circuits. Each IC contains four independent 2-to-1 multiplexers, allowing the selection of one of two data inputs per channel. This versatile multiplexer supports a single supply voltage, making it ideal for various logic and switching applications. The device is available in a DIP16 package, ensuring compatibility with standard through-hole mounting designs.

• Versatile Multiplexer: Allows for the selection of one data line from 16 inputs.
• Compact Design: Efficient use of space in electronic circuits.
• Low Power Consumption: Designed for minimal energy usage.

• Function: Counter
• 4 Bits
• Technology Family: HC
• Input Type: Standard CMOS

• High Output Power:
  • Stereo Mode: 2.3W (Typ) at 9V, 4Ω Load
  • Bridge Mode: 4.7W (Typ) at 9V, 8Ω Load
• Low switching distortion at high frequencies
• Built-in muting circuit minimizes power on/off noise

• Output Voltage: Fixed at 3.3V
• Output Current: Capable of supplying 1A
• Low Dropout Voltage: Operates with a dropout voltage as low as 1V
• Line Regulation: 0.2% Max

The TA7555P is a highly reliable Toshiba Silicon Monolithic Timer IC, perfect for a wide range of circuit applications. Key features include:

• Original Toshiba product
• 8 Pin PDIP package
• Great for common circuit building blocks

Perfect for hobbyists and professionals alike.

7806 Voltage Regulator – 6V provides stable voltage output for various electronic applications. Key features include:

• Fixed 6V voltage regulators
• Thermal overload protection
• Short circuit protection
• Output transition SOA protection
• Heatsink is required

The HA17741 is a general-purpose operational amplifier designed by Hitachi Semiconductor. It features dual op-amps in a single package, low noise, a wide voltage range up to 30V, and a high bandwidth of 10 MHz. This makes it ideal for high-quality audio circuits, professional sound systems, and control circuits.

The 7495 / 74HC95 / 74LS95 is a high-speed CMOS 8-bit shift register with integrated output latches and 3-state outputs, designed for use in various digital and logic control applications. This IC is fabricated using advanced silicon gate C2MOS technology, offering fast operation, efficient power management, and protection against static discharge and voltage transients. With its dual clocking system and ability to cascade, it is ideal for data storage, transfer, and serial-to-parallel conversion tasks.

• Complies with JEDEC standard no. 7A
• CMOS input levels
• Synchronous reversible counting
• Asynchronous parallel load

• 32-Pin Package: Compact design with 32 pins for flexible integration.
• High Memory Capacity: 32KB Flash, 2KB SRAM, and 1KB EEPROM.
• Multiple I/O Lines: 23 General-purpose I/O lines for versatile connectivity.
• Analog and Digital Processing: 10-bit ADC with 8 channels for accurate analog signal processing.

• Wide Supply Range: Operates from ±5-V to ±18-V supplies.
• Fast Acquisition Time: Less than 10-µs acquisition time.
• TTL/CMOS Compatible: Logic input is compatible with TTL, PMOS, CMOS.
• Low Hold Step: 0.5-mV typical hold step at Ch = 0.01 µF.

• Output Voltage: 1.8V
• Output Current: 1A
• Operates with a dropout voltage as low as 1V
• Line Regulation: 0.2% Max

• Low Voltage and Standard-Voltage Operation
• 2-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression

Optimize your electronic projects with the LM339 Low-Power Quad Voltage Comparator IC. Key features include:

• Wide single supply voltage range: +2 to +36 V or dual supplies: ±1 V to ±18 V
• Very low supply current: 1.1 mA typical, independent of supply voltage
• Low input bias current: 25 nA typical
• Low input offset current: ±5 nA typical
• Low input offset voltage: ±1 mV typical
• Input common-mode voltage range includes ground
• Low output saturation voltage: 250 mV typical (ISINK = 4 mA)
• Differential input voltage range equal to the supply voltage
• TTL, DTL, ECL, MOS, CMOS compatible outputs

Perfect for precision comparison applications, enhancing reliability and efficiency in your designs.