• Dual Wi-Fi (802.11b/g/n/e/i) and Bluetooth (4.2BR/EDR and BLE) connectivity.
• Built-in OV2640 camera for image capturing.
• Supports various communication interfaces like UART, SPI, I2C, PWM.
• Equipped with 32Mbit SPI flash and 520KB internal RAM, plus 8MB external PSRAM.

• Wireless Standard: 802.11 b/g/n
• Operating Modes: STA, AP, STA + AP
• Built-in TCP/IP Protocol Stack for multiple TCP Client connections (5 MAX)
• GPIO Ports: D0 ~ D8, SD1 ~ SD3 (15mA drive capability)

• Dual-core 240MHz CPU with high-speed processing
• WiFi, Bluetooth Classic, and BLE support
• 520KB SRAM, capable of running FreeRTOS, MicroPython, and more
• Compact 25.2mm x 18mm size with onboard antenna

• Supports Wi-Fi IEEE 802.11 b/g/n protocol with up to 150 Mbps data rate.
• Dual-band Wi-Fi with 20 MHz and 40 MHz bandwidth in the 2.4 GHz band.
• Bluetooth 5 support with Low Energy (LE) and Mesh functionality.
• Supports up to 4x Virtual Wi-Fi interfaces for flexible networking.

• Wi-Fi Standard: 802.11 b/g/n
• Wi-Fi Modes: Wi-Fi Direct (P2P), Soft-AP
• Integrated TCP/IP Protocol Stack: Enables easy communication over the internet
• Integrated TR Switch, Balun, LNA, Power Amplifier: For enhanced signal output

Specifications:

• System: ESP8266 in the form of the ESP-12F module
• Flash: 4MB
• Power supply: 3.3V or 5V from the USB port
• Built-in 2.4GHz 802.11 b/g/n WiFi communication
• WiFi modes: AP (Access Point), STA (Standalone), AP+STA
• Supported technologies: TKIP, WEP, CRC, CCMP, WPA/WPA2, WPS
• 11 GPIO pins
• 10 PWM outputs
• 1 analog input (ADC)
• Serial interfaces: UART, I2C, SPI, 1-Wire
• USB Type-C connector for programming and communication
• USB-UART converter on the CH340 chip
• PCB antenna built into the module
• Przysick Reset
• Goldpin raster: 2.54 mm
• Module dimensions: 34 x 25 mm
• Weight: 10 g

Package:

1x ESP8266 WEMOS D1 MINI ESP-12F Z USB-C

• High performance-price ratio for cost-effective development.
• Compact size, ideal for embedding into other products.
• Robust functionality with support for LWIP protocol and FreeRTOS.
• Operates in three modes: AP, STA, and AP+STA.

Specifications:

• MCU: ESP32-S3
• Flash: 16MB
• PSRAM: 8MB
• Wireless Connectivity: Wi-Fi 802.11/Bluetooth 5.0 + BT mesh
• Programming Platform: Arduino-IDE, Micropython
• Bat Voltage Detection: IO04
• Resolution: 170(H) x 320(V)
• Screen Size: 1.9" Diagonal
• Working Power Supply: 3.3V
• Interface: 8-Bit Parallel
• Product Size: 62mm (L) x 26mm (W) x 10mm (H)
• Product Weight: Approximately 40g

Package:

1x LILYGO TTGO T-Display S3 with shell

• CH340G Chipset for USB-to-serial communication.
• Micro-USB Connectivity for easy connection to your computer.
• Onboard PCB Antenna with 2dBi gain for stable signal strength.
• Supports Wi-Fi 802.11b/g/n/e/i and Bluetooth 4.2 BR/EDR and BLE standards.

• Excellent value for money
• Compact size, easy to integrate with other products
• Supports DC 5V-12V power supply
• 1 analog input (3.2V max input)

• Supports 802.11 b/g/n WiFi
• Wi-Fi Direct (P2P) & Soft-AP functionality
• Integrated TCP/IP protocol stack for easy internet communication
• Built-in Power Management with low standby consumption.

• Compatible with ESP-07 WiFi Module for seamless integration
• Onboard 3.3V Voltage Regulator for stable power supply
• Level Conversion Circuit for easy 5V microcontroller compatibility
• Compact PCB Design for space-saving applications

• Built-in CP2102 USB to serial converter for easy connectivity
• Supports multiple operating modes: STA, AP, STA+AP
• Integrated TCP/IP protocol stack with support for up to 5 TCP clients
• Supports various functions: GPIO, PWM, I2C, ADC

• Based on ESP-8266EX chip for enhanced Wi-Fi functionality.
• Compatible with Arduino IDE for easy programming.
• 11 x I/O pins for various input/output operations.
• 1 x ADC pin with input range of 0-3.3V for analog inputs.

• Supports both WiFi and Bluetooth
• Compatible with Arduino
• Micro USB connection for easy setup
• 1 analog input (3.2V max input)

Specifications:

• MCU: ESP32 Xtensa dual-core LX6 microprocessor
• Wireless Connectivity: Wi-Fi 802.11 b/ g/ n, BL V4.2+BLE
• Programming Platform: Arduino-ide、Micropython
• Serial chip: CH9102
• Flash: 16M
• Onboard functions: Buttons: l006+I007, battery power detection

For 1.14 inch ST7789V IPS LCD

• Resolution: 135 x 240
• High Density 260 PPI
• 4-Wire SPI interface
• Working Power Supply: 3.3V
• 1.14" diagonal
• Full-color TFT Display
• Drive: ST7789

Package:

1 X TTGO T-Display

1 X Power Cable

2 X Pin