• Supports Wi-Fi IEEE 802.11 b/g/n protocol with up to 150 Mbps data rate.
• Dual-band Wi-Fi with 20 MHz and 40 MHz bandwidth in the 2.4 GHz band.
• Bluetooth 5 support with Low Energy (LE) and Mesh functionality.
• Supports up to 4x Virtual Wi-Fi interfaces for flexible networking.

• Wi-Fi Standard: 802.11 b/g/n
• Wi-Fi Modes: Wi-Fi Direct (P2P), Soft-AP
• Integrated TCP/IP Protocol Stack: Enables easy communication over the internet
• Integrated TR Switch, Balun, LNA, Power Amplifier: For enhanced signal output

• Excellent value for money
• Compact size, easy to integrate with other products
• Supports DC 5V-12V power supply
• 1 analog input (3.2V max input)

• Built-in CP2102 USB to serial converter for easy connectivity
• Supports multiple operating modes: STA, AP, STA+AP
• Integrated TCP/IP protocol stack with support for up to 5 TCP clients
• Supports various functions: GPIO, PWM, I2C, ADC

• High performance-price ratio for cost-effective development.
• Compact size, ideal for embedding into other products.
• Robust functionality with support for LWIP protocol and FreeRTOS.
• Operates in three modes: AP, STA, and AP+STA.

• Dual-core 240MHz CPU with high-speed processing
• WiFi, Bluetooth Classic, and BLE support
• 520KB SRAM, capable of running FreeRTOS, MicroPython, and more
• Compact 25.2mm x 18mm size with onboard antenna

• Wireless Standard: 802.11 b/g/n
• Operating Modes: STA, AP, STA + AP
• Built-in TCP/IP Protocol Stack for multiple TCP Client connections (5 MAX)
• GPIO Ports: D0 ~ D8, SD1 ~ SD3 (15mA drive capability)

• Based on ESP-8266EX chip for enhanced Wi-Fi functionality.
• Compatible with Arduino IDE for easy programming.
• 11 x I/O pins for various input/output operations.
• 1 x ADC pin with input range of 0-3.3V for analog inputs.

• Micro USB Port: Easy connectivity with computers and power sources
• Pins: 11 digital input/output pins
• Advanced Functionality: Supports Interrupt, PWM, I2C, and One-Wire
• Analog Input: 1 analog input (maximum 3.2V)

• Compatible with ESP-07 WiFi Module for seamless integration
• Onboard 3.3V Voltage Regulator for stable power supply
• Level Conversion Circuit for easy 5V microcontroller compatibility
• Compact PCB Design for space-saving applications

Specifications:

• System: ESP8266 in the form of the ESP-12F module
• Flash: 4MB
• Power supply: 3.3V or 5V from the USB port
• Built-in 2.4GHz 802.11 b/g/n WiFi communication
• WiFi modes: AP (Access Point), STA (Standalone), AP+STA
• Supported technologies: TKIP, WEP, CRC, CCMP, WPA/WPA2, WPS
• 11 GPIO pins
• 10 PWM outputs
• 1 analog input (ADC)
• Serial interfaces: UART, I2C, SPI, 1-Wire
• USB Type-C connector for programming and communication
• USB-UART converter on the CH340 chip
• PCB antenna built into the module
• Przysick Reset
• Goldpin raster: 2.54 mm
• Module dimensions: 34 x 25 mm
• Weight: 10 g

Package:

1x ESP8266 WEMOS D1 MINI ESP-12F Z USB-C

• Supports 802.11 b/g/n WiFi
• Wi-Fi Direct (P2P) & Soft-AP functionality
• Integrated TCP/IP protocol stack for easy internet communication
• Built-in Power Management with low standby consumption.

• CH340G Chipset for USB-to-serial communication.
• Micro-USB Connectivity for easy connection to your computer.
• Onboard PCB Antenna with 2dBi gain for stable signal strength.
• Supports Wi-Fi 802.11b/g/n/e/i and Bluetooth 4.2 BR/EDR and BLE standards.

• Supports both WiFi and Bluetooth
• Compatible with Arduino
• Micro USB connection for easy setup
• 1 analog input (3.2V max input)

• Integrated ESP32-S2FH4 chip with advanced Xtensa single-core 32-bit LX7 microprocessor.
• Equipped with 128KB ROM and 320KB SRAM for efficient processing.
• Includes 16KB RTC SRAM for low-power applications.
• Built-in 40MHz crystal oscillator for stable operation.

• Fully compatible with original electrical and physical interfaces for serial transparent Bluetooth.
• Built-in industrial transparent transmission firmware V3.0 for stability and reliability.
• Integrated high-performance WiFi module ESP-M2.
• Supports seamless transparent transmission between serial and WiFi.