Electronic Speed Controllers (ESCs)

The ESC 30A Brushless Motor Speed Controller offers high performance and reliability for your RC projects. Key features include:

• Instant 45A, 40A continuous for 10 seconds
• Size: 45 x 24 x 8mm
• Voltage Range: 4V-16V
• Battery Number: 4-12 NIMH, 2-3 LIPO (4 LIPO BEC not allowed)
• BEC Output: 5V 3A, 30A stressed
• Protection Features: Automatic selection, temperature protection, out of control protection

• 50A Brushless ESC: High-performance electronic speed controller for RC vehicles
• 3A BEC: Built-in battery eliminator circuit for stable power supply
• Bidirectional Control: Allows forward and reverse movement
• Fully Automatic: No additional setup required for easy use

• High Power Handling: Supports up to 80A continuous current and 480A burst current for forward operation.
• Versatile Modes:
  • Forward & Reverse
  • Forward & Brake
  • Forward, Brake & Reverse
• Wide Voltage Compatibility: Operates with 2-4S LiPo or 5-12 NiMH batteries.
• BEC Output: Provides 5V / 3A output in linear mode.

• Suitable for a wide voltage range from 1S to 4S power supply.
• High-performance power tube AON6504 from AOS with a parameter of 85A30V.
• Estimated operating current between 20A-30A, depending on heat dissipation and usage environment.
• Does not include BEC and does not provide 5V voltage output.

• Wide operating voltage range: DC 4.5V-35V
• Adjustable speed control: 1% - 100% PWM duty cycle
• High efficiency: Supports up to 90W power output
• Stable performance: 20kHz PWM frequency

• 30A brush motor ESC: Supports 130/180/260/280/380 brush motors.
• Multiple functions: Forward, reverse, and brake mode.
• Wide voltage range: Works with 3.0V-9.4V power input.
• High efficiency: Constant current of 20A, max 25A for <30s, pulsed 50A for <5s.

• Brush Speed Controller: 20A capacity, perfect for various RC models.
• Multiple Functions: Forward, reverse, and brake functions for better control.
• Motor Compatibility: Works with 130/180/260/280/380 brush motors.
• Brake: Equipped with brake on/off functionality.

• Continuous output of 30A, with a burst of 40A for up to 10 seconds.
• Supports 2-3 cell lithium batteries or 4-10 cell NiCd/NiMh batteries.
• 1A / 5V BEC in linear mode for stable power supply.
• PWM frequency of 2 kHz ensures smooth control.

• Supports DC 9V-55V motor control
• High power output up to 3300W
• Adjustable speed control with a 270-degree potentiometer
• 60A continuous current capacity

The ESC 20A Brushless Motor Speed Controller by Lumenier is designed for high performance and reliability, perfect for mini FPV quads like the QAV250. Key features include:

• Instant 45A, continuous 20A on 4s
• Size: 27 x 14.5 x 6mm
• Voltage Range: 4V-16V
• Customized SimonK firmware with OneShot auto-detect
• Compatible with Lumenier motors (RX1806, RX2206, RXC2206, RX2208), 2S-4S
• Support for both 5" and 6" props
• No sync loss issues or cogging

40A Brushless ESC for Aircraft is ideal for both in-runner and out-runner brushless motors. Featuring advanced protections like start-up failure, overheat, and throttle signal loss protection, this ESC is built for high performance.

• Brake Setting: Enabled / Disabled (default)
• Battery Type: NiMH / LiPo (default)
• Cut-off Mode: Cut-off (immediate) / Soft cut-off (default)
• Cut-off Threshold: Low / Medium (default) / High
• Start Mode: Super soft / soft / Normal (default)
• Timing: Low (default) / Medium / High

Features high-quality components, various start modes, throttle range configuration, smooth throttle response, overheat protection, and more.

• High-quality 35A Brushless ESC for RC cars.
• Compatible with 1/18, 1/16, and 1/14 RC car models.
• Sensorless brushless motor technology for better efficiency and performance.
• Supports both Lipo (2-3 cells) and NIMH (4-9 cells) batteries.

• One-piece design with built-in electrolytic capacitors, fully waterproof and dustproof for enhanced durability in various environments.
• Bidirectional operation mode: Can move forward and backward, ideal for various RC car models.
• Made with high-quality materials, offering excellent resistance to high currents.
• Powerful BEC output capability, superior to other competing products.

• Supports 2-6S power supply voltage for versatile compatibility.
• Continuous current output of 35A for reliable performance.
• Built-in current sensor for precise monitoring.
• Compatible with Dshot 150, 300, and 600, with direct firmware upgrades.

• High Power Output: Supports up to 2000W output power for high-performance motors.
• Wide Voltage Range: Compatible with 12V, 24V, 36V, and 48V DC motors.
• Max Current: Can handle up to 40A instantaneous current, making it ideal for heavy-duty motors.
• PWM Regulation: Adjust motor speed with PWM regulation in the range of 5-100%.

• Wide voltage control range from AC 50V to 220V for flexible applications.
• High maximum power capacity of 2000W for heavy-duty operations.
• SCR (Silicon-Controlled Rectifier) technology for smooth and reliable voltage regulation.
• Ideal for DIY and integration projects without the protective shell for customization.