- Compatible with RAMPS 1.4/1.5/1.6, SKR V1.1, V1.3, SKR Pro, MKS Gen V1.4 control boards
- Supported by Marlin firmware
- Includes SD card reader and rotary encoder
- 128×64 LCD display for full graphical interface
All Cattegories
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
-
Components
addremove
- Resistorsaddremove
- Capacitorsaddremove
- Inductors & Coilsaddremove
- Diodesaddremove
- Transistorsaddremove
- Integrated Circuits (IC)addremove
- Sensorsaddremove
- Switchesaddremove
- Connectorsaddremove
- Crystal Oscillators and Resonatorsaddremove
- Miscellaneous Componentsaddremove
- Optocouplers
- Other
-
Microcontrollers and SBC
addremove
- Microcontroller Units (MCUs)addremove
- Single-Board Computersaddremove
- Modules & Shieldsaddremove
- accessories
-
3D Printer Components
addremove
- Filamentsaddremove
- 3D Printer Partsaddremove
- Electronics for 3D Printersaddremove
- CNC Machinesaddremove
- Mechanisms
- 3D Printers
-
Power Tools
addremove
- Handheld Toolsaddremove
- Stationary Tools
- Soldering Equipmentaddremove
- Measurement Toolsaddremove
- Tool & Accessoriesaddremove
- Accessories addremove
-
Consumer Electronics
addremove
- Power Adapters & Chargersaddremove
- Cables and Connectorsaddremove
- Monitors & Displaysaddremove
- Accessoriesaddremove
- Amplifier Boards
- Speakers
- Others
- Power Banks & Modules
- Projectors
-
RC Hobby Components
addremove
- Motors & ESCsaddremove
- Batteries & Chargersaddremove
- Radio Systemsaddremove
- Frames and Chassisaddremove
- Propellers and Wheelsaddremove
- Other RC Accessoriesaddremove
- Camera and accessories
- RC Toys
- Others
- DIY Robot Parts addremove
- Other Electronics addremove
- Projects
GT2 8mm BORE 20 TEETH PULLEY MOTOR GEAR
- Write a review
Model: 1214
- Designed for GT2 6mm synchronous belts
- Double flange for better grip and stability
- High precision for smooth operation
- Durable material for long-lasting use
Data Protection.
Delivery all over Bangladesh.

Guarantee safe & secure checkout
Specifications:
-
Color: Silver
-
Tooth Number: 20
-
Tooth Pitch: 2mm
-
Bore Diameter: 8mm
-
Flange: Double
-
Tooth Width: 7mm (Perfect for 6mm synchronous belt)
Package:
-
1 x GT2 8mm Bore 20 Teeth Pulley Motor Gear
Description:
The GT2 8mm Bore 20 Teeth Pulley Motor Gear is a high-quality gear designed to work with 6mm synchronous belts in various mechanical systems. Its precise tooth pitch ensures smooth and efficient power transmission. With a durable double flange design, this gear provides stability and reliability in your mechanical setup. Perfect for motors in robotics, 3D printers, or other motorized projects.
FAQ:
Q1: What type of belts is this pulley gear compatible with?
A1: It is compatible with 6mm synchronous belts.
Q2: What is the bore diameter of this pulley?
A2: The bore diameter is 8mm.
Q3: Does this pulley have a flange?
A3: Yes, it has a double flange design for added stability.
Q4: What is the tooth pitch of this gear?
A4: The tooth pitch is 2mm.
Q5: How many teeth does this gear have?
A5: The gear has 20 teeth.
GT2 8mm BORE 20 TEETH PULLEY MOTOR GEAR ElectronicsBD Bangladesh (BD)
In Bangladesh, you can get the best Quality and original GT2 8mm BORE 20 TEETH PULLEY MOTOR GEAR from ElectronicsBD. We have a large collection of the latest GT2 8mm BORE 20 TEETH PULLEY MOTOR GEAR to purchase. Order online or visit our shop ElectronicsBD to get yours at the lowest price.What is the latest and best price of GT2 8mm BORE 20 TEETH PULLEY MOTOR GEAR in Bangladesh (BD) ?
The latest and special price of GT2 8mm BORE 20 TEETH PULLEY MOTOR GEAR in Bangladesh is BDT 185 Taka. Buy best quality GT2 8mm BORE 20 TEETH PULLEY MOTOR GEAR from ElectronicsBD at a special price in Bangladesh (BD). You can buy GT2 8mm BORE 20 TEETH PULLEY MOTOR GEAR at best price from ElectronicsBD or visit ElectronicsBD Store. বাংলাদেশে আকর্ষণীয় মূল্যে কিনুন GT2 8mm BORE 20 TEETH PULLEY MOTOR GEAR শুধুমাত্র ইলেকট্রনিক্স বিডি ElectronicsBD থেকে। ElectronicsBD বাংলাদেশের সকল প্রধান স্থান যেমন বরিশাল, চট্টগ্রাম, ঢাকা, খুলনা, রাজশাহী, রংপুর, ময়মনসিংহ, সিলেটে সহ সকল স্থানে পণ্য ডেলিভারি করে ।Thank you for the reviews ! Your comment is submitted
16 other products in the same category:
- High-Quality Material: Made from GCr15 45# Steel, ensuring durability and wear resistance.
- Precision Engineering: High accuracy rating (G6/H6) for smooth motion in CNC and 3D printer applications.
- Hardened for Strength: Hardness rating of HRC62±2, making it ideal for heavy-duty linear motion systems.
- Stainless steel cleaning needles for 3D printer nozzles.
- Designed for 0.35mm nozzles.
- Durable and corrosion-resistant.
- Easy to use for unclogging or cleaning the nozzles.
- Bi-metal material: Red brass and stainless steel
- Suitable for 1.75mm filament
- Threaded: M6/M7mm
- Compatible with Prusa i3 MK3 Heater Block
- Length: 21/22mm
- High-quality aluminum alloy construction for durability
- 20 teeth design for precise motion control
- Double flange for secure belt alignment
- Fits timing belts with a 6mm width
- Durable Build: Made from high-quality aluminum for long-lasting performance.
- Precision Design: 6mm to 6mm shaft compatibility ensures secure and precise coupling.
- Compact Size: Lightweight and compact design with a 25mm length and 20mm diameter.
- Flexibility: Absorbs misalignments and reduces vibrations for smoother operation.
- Enclosed design for stable and precise 3D printing.
- Large print size of 200x200x200mm.
- Supports high-temp filaments like PLA and ABS.
- Touchscreen interface for easy control.
- High-quality neoprene rubber with a fiberglass core
- 2mm pitch for precise motion control
- 55 teeth for smooth operation
- Durable and wear-resistant design
- Made from durable Rubber PU material
- 900mm length for various applications
- 6mm width ensures compatibility with GT2 pulleys
- High precision and low noise operation
- Supports 42, 57, 85, and 86 series two-phase hybrid stepping motors.
- Lower heating temperature and noise, ensuring smoother performance.
- Micro-step breakdown of 15 settings with a maximum of 25,000 pulses/rev.
- Peak current range of 1.0A to 4.2A with 8 output current settings.
- 3-axis stepper motor driver, ideal for CNC and laser engraving machines.
- Compatible with GRBL firmware, making it perfect for CNC projects.
- Supports two-phase, four-wire stepper motors with up to 2A per motor.
- I2C interface available for LCD and other I2C modules.
- Simple step and direction control interface
- Supports six microstep resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Compatible with both 3.3V and 5V systems
- Over-temperature, over-current, and under-voltage protection
- Durable Material – Made of high-quality brass for long-lasting use.
- Precise Dimensions – 8mm diameter with a 2mm pitch and 8mm lead for accuracy.
- Perfect for Z-Axis – Specifically designed for use in 3D printer Z Axis for smooth operation.
- Easy Installation – Simple to install and use in your 3D printer setup.
- High-speed 3D printing with up to 200mm/s speed.
- Large build volume for versatile projects: 260 x 260 x 330 mm.
- Advanced FDM technology with delta structure for precision.
- Auto-leveling system for hassle-free setup.
- High-precision T8 lead screw for smooth linear motion
- Made of durable stainless steel for long-lasting performance
- Compatible with various 3D printers and CNC machines
- Includes a brass nut for accurate positioning
- High Current Capacity: Supports current up to 2A, ideal for high-performance applications
- Microstepping: Provides up to 1/256 microstepping for smooth and precise motor control
- Flexible Voltage: Works with a wide input voltage range from 5.5V to 28V
- Dual Mode Operation: DIR/STEP and UART modes for versatile control
- Compatible with RAMPS 1.4/1.5/1.6, SKR V1.1, V1.3, SKR Pro, MKS Gen V1.4 control boards
- Supported by Marlin firmware
- Includes SD card reader and rotary encoder
- 128×64 LCD display for full graphical interface
- High-Quality Material: Made from GCr15 45# Steel, ensuring durability and wear resistance.
- Precision Engineering: High accuracy rating (G6/H6) for smooth motion in CNC and 3D printer applications.
- Hardened for Strength: Hardness rating of HRC62±2, making it ideal for heavy-duty linear motion systems.
- Stainless steel cleaning needles for 3D printer nozzles.
- Designed for 0.35mm nozzles.
- Durable and corrosion-resistant.
- Easy to use for unclogging or cleaning the nozzles.
- Bi-metal material: Red brass and stainless steel
- Suitable for 1.75mm filament
- Threaded: M6/M7mm
- Compatible with Prusa i3 MK3 Heater Block
- Length: 21/22mm
- High-quality aluminum alloy construction for durability
- 20 teeth design for precise motion control
- Double flange for secure belt alignment
- Fits timing belts with a 6mm width
- Durable Build: Made from high-quality aluminum for long-lasting performance.
- Precision Design: 6mm to 6mm shaft compatibility ensures secure and precise coupling.
- Compact Size: Lightweight and compact design with a 25mm length and 20mm diameter.
- Flexibility: Absorbs misalignments and reduces vibrations for smoother operation.
- Enclosed design for stable and precise 3D printing.
- Large print size of 200x200x200mm.
- Supports high-temp filaments like PLA and ABS.
- Touchscreen interface for easy control.
- High-quality neoprene rubber with a fiberglass core
- 2mm pitch for precise motion control
- 55 teeth for smooth operation
- Durable and wear-resistant design
- Made from durable Rubber PU material
- 900mm length for various applications
- 6mm width ensures compatibility with GT2 pulleys
- High precision and low noise operation
- Supports 42, 57, 85, and 86 series two-phase hybrid stepping motors.
- Lower heating temperature and noise, ensuring smoother performance.
- Micro-step breakdown of 15 settings with a maximum of 25,000 pulses/rev.
- Peak current range of 1.0A to 4.2A with 8 output current settings.
- 3-axis stepper motor driver, ideal for CNC and laser engraving machines.
- Compatible with GRBL firmware, making it perfect for CNC projects.
- Supports two-phase, four-wire stepper motors with up to 2A per motor.
- I2C interface available for LCD and other I2C modules.
- Simple step and direction control interface
- Supports six microstep resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Compatible with both 3.3V and 5V systems
- Over-temperature, over-current, and under-voltage protection
- Durable Material – Made of high-quality brass for long-lasting use.
- Precise Dimensions – 8mm diameter with a 2mm pitch and 8mm lead for accuracy.
- Perfect for Z-Axis – Specifically designed for use in 3D printer Z Axis for smooth operation.
- Easy Installation – Simple to install and use in your 3D printer setup.
- High-speed 3D printing with up to 200mm/s speed.
- Large build volume for versatile projects: 260 x 260 x 330 mm.
- Advanced FDM technology with delta structure for precision.
- Auto-leveling system for hassle-free setup.
- High-precision T8 lead screw for smooth linear motion
- Made of durable stainless steel for long-lasting performance
- Compatible with various 3D printers and CNC machines
- Includes a brass nut for accurate positioning
- High Current Capacity: Supports current up to 2A, ideal for high-performance applications
- Microstepping: Provides up to 1/256 microstepping for smooth and precise motor control
- Flexible Voltage: Works with a wide input voltage range from 5.5V to 28V
- Dual Mode Operation: DIR/STEP and UART modes for versatile control
- Compatible with RAMPS 1.4/1.5/1.6, SKR V1.1, V1.3, SKR Pro, MKS Gen V1.4 control boards
- Supported by Marlin firmware
- Includes SD card reader and rotary encoder
- 128×64 LCD display for full graphical interface
- High-Quality Material: Made from GCr15 45# Steel, ensuring durability and wear resistance.
- Precision Engineering: High accuracy rating (G6/H6) for smooth motion in CNC and 3D printer applications.
- Hardened for Strength: Hardness rating of HRC62±2, making it ideal for heavy-duty linear motion systems.
- Stainless steel cleaning needles for 3D printer nozzles.
- Designed for 0.35mm nozzles.
- Durable and corrosion-resistant.
- Easy to use for unclogging or cleaning the nozzles.
- Bi-metal material: Red brass and stainless steel
- Suitable for 1.75mm filament
- Threaded: M6/M7mm
- Compatible with Prusa i3 MK3 Heater Block
- Length: 21/22mm
- High-quality aluminum alloy construction for durability
- 20 teeth design for precise motion control
- Double flange for secure belt alignment
- Fits timing belts with a 6mm width