Enhance your Arduino projects with our 0.96 Inch IIC/I2C 128x64 Blue OLED Display Module. This high-resolution display offers a wide viewing angle and ultra-low power consumption, making it perfect for various applications. It supports multiple operating modes and is fully compatible with 3.3V and 5V logic systems.

• Resolution: 128x64 pixels
• Viewing Angle: Over 160°
• Power Consumption: 0.06W
• Voltage: DC 3V-5V
• Operating Temperature: -30°C to 70°C
• Size: 27.8mm x 27.3mm x 4.3mm
• Operating Modes: 3-wire SPI, 4-wire SPI, IIC
• Chip Select Signal: CS signal for multiple device support
• Compatibility: Compatible with 3.3V and 5V control chips
• Internal Drive Chip: SSD1306

Upgrade your Arduino projects with our 2.8 Inch SPI TFT LCD Module. Featuring a resolution of 240x320 and the ST7789V driver IC, this module is compatible with both 3.3V and 5V logic. It includes a white LED backlight, PCB adapter, and micro SD card slot for enhanced functionality.

• Driver IC: ST7789V
• Backlight: White LED
• Viewing Direction: 6 o'clock
• Color Depth: 262K/65K
• Resolution: 240RGB*320 Dots
• Compatibility: Works with 3.3V or 5V logic
• IO Requirement: Needs at least 4 IOs from MCU
• PCB Plate: Includes power supply IC and SD card slot

The CA-1235 Power Module offers adjustable output voltages from 1.25V to 5V with a current output of 3A. It supports an input voltage range of 5V to 16V. Designed for LCD TV small signal power supply repair, this module provides a reliable solution with easy voltage adjustment via the short circuit point. The default output voltage is set to 1.25V. Ideal for various electronics repair projects, this module ensures efficient power management and stable performance.

• Input voltage range: 5V to 16V
• Adjustable output voltage: 1.25V, 1.5V, 1.8V, 2.5V, 3.3V, 5V
• Current output: 3A
• Short circuit point for easy voltage adjustment
• Default output voltage: 1.25V
• Suitable for LCD TV small signal power supply repair
• Efficient power management and stable performance

The 2.4" TFT Touch Display for Arduino is an essential component for your Arduino projects. Designed for compatibility and ease of use, this touch display offers:

• High Resolution: 240×320 resolution with 18-bit (262,000) colors.
• SPFD5408 Controller: Built-in video RAM buffer for smooth performance.
• Digital Interface: 8-bit digital interface with 4 control lines.
• Pin Compatibility: Uses digital pins 5-13 and analog pins 0-3. Pin 12 is available if not using the microSD.
• Voltage Compatibility: Works with 3.3V or 5V logic.
• Backlight Control: 4 white LED backlights, on by default, with transistor control option.

Package includes:

• 1x 2.4" TFT Touch Display for Arduino

Key Features:

• Compact size: 14x10cm
• Easy-to-read indicator
• Shows real-time status of solar panel
• Simple installation

• Screen Size: 64x48 Pixels, with a 0.66-inch diagonal display
• Driver IC: Uses SSD1306 driver for clear and sharp display quality
• I2C Interface: Easy to integrate with other devices using I2C communication
• Operating Voltage: Compatible with 3.3V

Enhance your industrial automation setup with our High-Quality RS232 to RS485 Communication Data Converter Adapter. This robust converter ensures smooth data transmission across various applications.

• Converts RS232 to RS485
• Supports Industrial Environments
• Compact and Durable
• Plug and Play Setup

HDMI to VGA Converter offers seamless conversion from HDMI digital signals to VGA analog signals. With a gold plated premium HDMI connector, it supports resolutions up to 1080p and features plug-and-play functionality.

• Input/Output Signal: HDMI digital/VGA analog
• Gold plated premium HDMI connector
• Supported Resolutions: 480i/480p/576i/576p/800x600/720i/720p/1280x1024/1600x1200/1080i/1080p
• Bandwidth: 165MHz/1.65Gbps per channel (6.75Gbps all channel)
• Analog video output: up to UXGA and 1080p with 10-bit DAC
• Vertical Frequency Range: 50/60Hz
• HDCP Compliant: HDCP 1.2
• Supports Audio Output
• No power requirements, plug and play

Note: Does not work with Macbook Pro with retina display.

Anycast HDMI Dongle - Wireless Display Adapter

Stream your favorite content seamlessly with the Anycast HDMI Dongle. This versatile dongle supports multiple standards and platforms, allowing you to cast videos, photos, games, and files from your devices to your TV or monitor effortlessly.

• Color: Black
• Interface: 1 x HDMI 1.2; 1 x Micro USB 2.0
• Power Supply: 5V / 1A
• Item size: 6.5 x 3.5 x 1.2 cm
• Receiver weight: 15g
• Package size: 13.0 x 10.0 x 2.8 cm
• Package weight: 79g
• Multi-Standard support: Miracast, DLNA, Airplay
• Multi-Platform support: Android, iOS, Windows, Mac

Package Includes:

• 1x Anycast Dongle
• 1x USB Cable
• 1x Manual

• Compatible with RAMPS 1.4 and 1.6 for 3D printers.
• 20x4 character LCD screen for real-time printing status display.
• Comes with an SD card slot for standalone printing.
• Plug-and-play design with easy installation.

The 7 Segment LED Display 0.56" Common Anode is a single-digit ultra-bright red display, perfect for various electronics projects and applications. This model 5161AS display features a common-anode mode, making it easy to integrate into your designs. Ideal for use in digital clocks, counters, and other numerical display projects.

Key Features:

• Ultra-bright red color for maximum visibility
• 0.56-inch digit size
• Common-anode mode for easy integration
• Durable and reliable performance

The 8x8 LED Matrix, 20x20 mm is a compact and bright display solution perfect for various electronic projects. With 64 bright white LEDs arranged in an 8x8 grid, this tiny 0.8" square matrix offers clear and vibrant displays. It features 16 pins (8 on each side) spaced at 0.1", making it easy to plug into a breadboard for quick and efficient wiring.

Key Features:

• Compact 20x20 mm (0.8" square) LED matrix
• 64 bright white LEDs in an 8x8 configuration
• 16 pins with 0.1" spacing for easy breadboard use
• Requires 1:8 multiplex control
• Compatible with 74HC595, TPIC6B595, or MAX7219 for multiplexing

The 1-Digit 16-Segment Alphanumeric LED Display is perfect for a variety of display needs, offering high contrast light output and low current operation. Key features include:

• 0.8 inch character height
• Low current operation
• High contrast light output
• Easy mounting on PC boards or sockets
• Gray face with white segments

Enhance your electronic projects with the 7 Segment 3-Digit LED Display 40x20 mm. This high brightness, reliable display is perfect for various applications requiring clear numeric indication.

Key Features:

• Digit Height: 0.56 inch
• 3 Digits Display
• Common Cathode Type
• 12 Pins Configuration
• Red LED Color
• Size: 37mm x 19mm
• High brightness LED for clear visibility
• Reliable operation and long service life
• Low power consumption
• IC-compatible

The 7 Segment Display Module TM1637 4-Digit LED is a versatile and high-performance display module designed for a range of applications. With its 4-digit red alpha-numeric display and built-in TM1637 driver IC, it provides clear and efficient visual output. The module is compatible with Arduino UNO, MEGA2560, Leonardo, and supports various voltages, making it perfect for voltage meter displays, ultrasonic distance measurement displays, and more.

• Compatible with: Arduino UNO, MEGA2560, Leonardo
• Display: 4 digit red alpha-numeric with decimal point
• Gray Levels: 8 adjustable
• Working Voltage: 3.3~5.5V DC
• Working Current: 80mA (MAX)
• Applications: Voltage meter display, Ultrasonic distance measurement display

Package includes:

• 1x 7 Segment Display Module TM1637 4-Digit LED

Discover the LCD Blue Display 1602, perfect for your Arduino projects in Bangladesh. This standard blue backlight HD44780 LCD supports 16 characters wide and 2 rows in white text on a blue background. Featuring an I2C serial interface, it simplifies data display with minimal resource usage.