• 1.3-inch HD IPS color screen
• Vivid colors, better than ordinary TFT LCD
• Resolution: 240x240 pixels
• Adjustable display direction: horizontal and vertical

The 8x8 LED Matrix Module (60x60mm) QFT2388ASR is ideal for building custom LED displays that can be interfaced with an Arduino microcontroller. This module includes 64 LEDs, capacitors, resistors, and a MAX7219CNG serially interfaced 8-digit LED display driver, making it perfect for DIY projects.

Key Features:

• LEDs: 64 x 5mm White LEDs
• Capacitors: 1 x 10uF electrolytic, 1 x 0.1uF ceramic
• Resistors: 1 x 10k ohm resistor
• Driver IC: MAX7219CNG Serially Interfaced 8-Digit LED Display Driver
• Power Supply: Compatible with Arduino
• Dimensions: 60x60mm

• 3.2-inch TFT LCD screen with Ultra HD resolution
• Screen resolution: 480x320 pixels
• High-quality backlight with 6 white LEDs
• Wide power supply range (5V/3.3V)

• 3-inch LCD screen for 3D printers
• 128x64 resolution for clear and detailed display
• High brightness and adjustable contrast (6.0)
• Designed specifically for RepRap RAMPS1.4 3D printer setups

The OLED Display Module 0.91 Inch 128x32 is a high-performance display module that offers superior display quality with lower power consumption compared to traditional LCDs. Featuring a blue display and driven by the SSD1306 IC, this module is perfect for a variety of electronic projects.

Key Features:

• Self-illuminating OLED display, no backlight needed
• Driver IC: SSD1306
• Size: 0.91 inch OLED
• Resolution: 128x32
• IIC interface
• Display Color: Blue
• Low power consumption

The MAX7219 Dot LED Matrix Module integrates a serial input/output common-cathode display driver. It connects microprocessors to 7-segment digital LED displays with 8 digits, bar graphs, or up to 64 individual LEDs. It features an on-chip BCD encoder, multi-channel scanning, segment word drive, and 8x8 static RAM for data storage.

• Integrated serial input/output common-cathode display driver
• Connects to 7-segment digital LED displays with 8 digits or up to 64 individual LEDs
• Features BCD encoder, multi-channel scanning, and segment word drive
• 8x8 static RAM for data storage
• Convenient 4-wire serial interface for microprocessors
• Low-power 150μA shutdown mode
• Analog and digital brightness control
• LED detection mode

• Screen Size: 64x48 Pixels, with a 0.66-inch diagonal display
• Driver IC: Uses SSD1306 driver for clear and sharp display quality
• I2C Interface: Easy to integrate with other devices using I2C communication
• Operating Voltage: Compatible with 3.3V

Enhance your Arduino projects with our 0.96 Inch IIC/I2C 128x64 Blue OLED Display Module. This high-resolution display offers a wide viewing angle and ultra-low power consumption, making it perfect for various applications. It supports multiple operating modes and is fully compatible with 3.3V and 5V logic systems.

• Resolution: 128x64 pixels
• Viewing Angle: Over 160°
• Power Consumption: 0.06W
• Voltage: DC 3V-5V
• Operating Temperature: -30°C to 70°C
• Size: 27.8mm x 27.3mm x 4.3mm
• Operating Modes: 3-wire SPI, 4-wire SPI, IIC
• Chip Select Signal: CS signal for multiple device support
• Compatibility: Compatible with 3.3V and 5V control chips
• Internal Drive Chip: SSD1306

Enhance your industrial automation setup with our High-Quality RS232 to RS485 Communication Data Converter Adapter. This robust converter ensures smooth data transmission across various applications.

• Converts RS232 to RS485
• Supports Industrial Environments
• Compact and Durable
• Plug and Play Setup

The 2.4" TFT Touch Display for Arduino is an essential component for your Arduino projects. Designed for compatibility and ease of use, this touch display offers:

• High Resolution: 240×320 resolution with 18-bit (262,000) colors.
• SPFD5408 Controller: Built-in video RAM buffer for smooth performance.
• Digital Interface: 8-bit digital interface with 4 control lines.
• Pin Compatibility: Uses digital pins 5-13 and analog pins 0-3. Pin 12 is available if not using the microSD.
• Voltage Compatibility: Works with 3.3V or 5V logic.
• Backlight Control: 4 white LED backlights, on by default, with transistor control option.

Package includes:

• 1x 2.4" TFT Touch Display for Arduino

• High Compatibility: Designed specifically for Creality Ender-3 3D printers.
• Clear Display: 128x64 resolution with white and blue display colors.
• User-Friendly Control: Equipped with a potentiometer for easy operation.
• Robust Housing: Metal casing with a sleek black finish and white markings.

Key Features:

• Compact size: 14x10cm
• Easy-to-read indicator
• Shows real-time status of solar panel
• Simple installation

Enhance your microcontroller projects with the MAX7219 Dot Matrix Module 4-In-1 Display with 5P Line. This versatile module supports an 8x8 dot matrix common cathode display and operates at a voltage of 5V. Measuring 12.8 x 12.8 x 1.3cm, it features 64 fixing screw holes with a diameter of 3mm, allowing for easy installation. The module includes input and output interfaces, supporting cascading multiple modules for expanded display capabilities. Ideal for various applications, this module ensures seamless integration with your microcontroller setup.

• Supports 8x8 dot matrix common cathode display
• Operating voltage: 5V
• Dimensions: 12.8 x 12.8 x 1.3cm
• 64 fixing screw holes with 3mm diameter
• Input and output interfaces for cascading multiple modules
• Includes 5P line for easy connection

The 7 Segment Display Module TM1637 4-Digit LED is a versatile and high-performance display module designed for a range of applications. With its 4-digit red alpha-numeric display and built-in TM1637 driver IC, it provides clear and efficient visual output. The module is compatible with Arduino UNO, MEGA2560, Leonardo, and supports various voltages, making it perfect for voltage meter displays, ultrasonic distance measurement displays, and more.

• Compatible with: Arduino UNO, MEGA2560, Leonardo
• Display: 4 digit red alpha-numeric with decimal point
• Gray Levels: 8 adjustable
• Working Voltage: 3.3~5.5V DC
• Working Current: 80mA (MAX)
• Applications: Voltage meter display, Ultrasonic distance measurement display

Package includes:

• 1x 7 Segment Display Module TM1637 4-Digit LED

Discover the LCD Blue Display 1602, perfect for your Arduino projects in Bangladesh. This standard blue backlight HD44780 LCD supports 16 characters wide and 2 rows in white text on a blue background. Featuring an I2C serial interface, it simplifies data display with minimal resource usage.

The 8x8 LED Matrix, 20x20 mm is a compact and bright display solution perfect for various electronic projects. With 64 bright white LEDs arranged in an 8x8 grid, this tiny 0.8" square matrix offers clear and vibrant displays. It features 16 pins (8 on each side) spaced at 0.1", making it easy to plug into a breadboard for quick and efficient wiring.

Key Features:

• Compact 20x20 mm (0.8" square) LED matrix
• 64 bright white LEDs in an 8x8 configuration
• 16 pins with 0.1" spacing for easy breadboard use
• Requires 1:8 multiplex control
• Compatible with 74HC595, TPIC6B595, or MAX7219 for multiplexing