• Resistance: 220 Ohms, ideal for high-power applications.
• Power Rating: 20W, capable of handling significant power loads.
• Tolerance: ±5%, ensuring reliable performance.
• Construction: Wire-wound for precision and durability.

• High-quality electrolytic capacitor with excellent performance
• Long lifespan for durable applications
• Low leakage current ensures stable operation
• Easy mounting with radial leads

• Core Architecture: AVR 8-bit
• Max Frequency: 10 MHz
• Data Bus Width: 8 bits
• Memory Size:
  • Flash Memory: 8 kB
  • EEPROM Memory: 64 bytes

• Wide Operating Voltage: Supports DC 5-30V for flexible power options.
• High Precision: Measures soil NPK parameters with ±2% full-scale accuracy.
• Wide Measurement Range: NPK detection range of 1-1999 mg/kg (mg/L).
• Fast Response Time: Outputs results in less than 1 second.

• High-quality glass fiber for durability and sturdiness
• Well-etched and well-drilled for easy component soldering
• Single-sided PCB with plated holes for a reliable and solid connection
• Letter-indicator printed on the edge for easy hole identification

• Material: Made of durable plastic and metal for long-lasting use.
• Rainbow Color: Bright, colorful design for easy identification.
• Connector Compatibility: Suitable for FC IDC 2.54mm connectors.
• Pin Pitch: 1.27mm/0.05" for reliable connections.

• High-quality cement oxide resistor with 15 OHM resistance.
• Durable ceramic and cement construction ensures efficient heat dissipation.
• 20W power rating suitable for high-power circuit applications.
• 5% tolerance provides stable and accurate performance.

• High continuous drain current of up to 35A.
• Handles pulsed drain currents up to 50A.
• Robust drain-to-source breakdown voltage of 60V.
• Low drain-source resistance (0.018 Ohms) for minimal power loss.

• High current capacity for power applications
• Designed for switching and amplification
• Low saturation voltage
• Robust construction for reliable performance

• Includes 1 x 9V battery cap
• Comes with 1 x 5.5mm DC jack
• Suitable for powering devices with a 5.5mm barrel plug
• Length of 170mm for extended reach

Specifications:

• Resistance: 5.6k ohms
• Power Rating: 0.5 Watt (1/2W)
• Type: Metal Film Resistor
• Tolerance: ±1% (or as specified)
• Temperature Coefficient: ±50ppm/°C (typical for metal film resistors)
• Lead Diameter: Typically 0.6mm
• Body Size: Length ~6.3mm, Diameter ~2.3mm
• Operating Temperature Range: -55°C to +155°C
• Packaging: Usually in tape or bulk

Package:

5x 5.6k 0.5 Watt Metal Film Resistor 5.6k 1/2W MFR Resistor

• 4-Bit Magnitude Comparator for digital applications.
• Cascadable Design for comparing larger bit values.
• High-Speed Operation with LS (Low Power Schottky) technology.
• TTL Compatible with standard logic circuits.

• Current Rating: 3.0A maximum current capacity.
• Wide Operating Temperature: From -40°C to +105°C, ensuring reliable performance in various environments.
• Low Contact Resistance: 20mΩ Max for efficient conductivity.
• High Insulation Resistance: 1000MΩ Min for improved safety and performance.

• Durable material: Made with copper for excellent conductivity.
• Heat-resistant insulation: Insulating material of PVC and Nylon for high temperature resistance.
• Electro-plated tin plating: Provides improved durability and corrosion resistance.
• Compact design: Ideal for various electrical applications and tight spaces.

• Pre-Amplifier: Low Level, Low Noise NPN Transistor
• Current Gain (hFE): 60 to 1000 (Good Linearity)
• Continuous Collector Current (IC): 100mA
• Collector-Emitter Voltage (VCEO): 45V

• Voltage: 2.7V
• Capacitance: 500F
• Size: 35 * 60mm
• Type: Ultra Capacitors (Super Capacitors)