• Compact surface-mount design for space-saving PCB integration.
• Multilayer ceramic construction for enhanced stability and reliability.
• 47nF (0.047μF) capacitance ideal for signal filtering, coupling, and decoupling.
• 1206 package size compatible with automated assembly processes.

• Compact 1206 SMD size (3.2 x 1.6 mm)
• Wide 120° viewing angle for broad light dispersion
• Suitable for a variety of colors, including yellow, red, and white
• Low operating current of 20mA, ideal for low-power applications

• Compact and Efficient: Designed for accurate measurement in a small size.
• Wide Humidity Range: Measures humidity between 20% and 90%.
• Wide Temperature Range: Measures temperature from 0°C to 50°C.
• High Accuracy: Temperature accuracy of ±2°C and humidity accuracy of ±5% RH.

• Bi-Polar PNP Amplifier Transistor
• DC Current Gain (hFE) is 800 maximum
• Continuous Collector current (IC) is 100mA
• Peak Collector current (Ic) is 200mA

• High-quality cement oxide resistor with 100 OHM resistance.
• Durable ceramic and cement construction for efficient heat dissipation.
• 20W power rating suitable for high-power applications.
• 5% tolerance ensures stable and accurate performance.

• 30W power rating for high-power applications
• Constructed with ceramic and cement for durability
• 5% tolerance for accurate resistance
• White color for easy visibility

Specifications:

• Rated Current: 5A
• Rated Voltage: 220V AC
• Number of Pins: 14-pin configuration
• Relay Type: Electromagnetic
• Contact Form: SPDT (Single Pole Double Throw)
• Dielectric Strength: 1500VAC for 1 minute between coil and contacts
• Operating Temperature Range: -40°C to +85°C
• Electrical Life: Over 100,000 cycles
• Mechanical Life: Over 10 million cycles
• Dimensions: Standard relay size for easy installation in control panels
• Mounting: Plug-in type, suitable for standard relay sockets

Package:

1x Relay

• Compact 1206 SMD size (3.2 x 1.6 mm)
• Wide 120° viewing angle for broad light dispersion
• Suitable for a variety of colors, including blue, red, and white
• Low operating current of 20mA, ideal for low-power applications

• Capacitance of 0.1µF
• Voltage rating of 250V
• Mylar dielectric for high performance
• Ideal for AC applications

• Core Architecture: AVR 8-bit
• Max Frequency: 10 MHz
• Data Bus Width: 8 bits
• Memory Size:
  • Flash Memory: 8 kB
  • EEPROM Memory: 64 bytes

• High-quality 5mm RGB LED for vibrant lighting
• Offers multiple colors (Red, Green, Blue) for diverse lighting effects
• Low power consumption with high brightness
• Ideal for DIY electronics, lighting projects, and decorations

• Durable ceramic and cement body
• 20W power rating for high power handling
• 5% tolerance for reliable resistance value
• White color for easy identification

Specifications:

• Resistance: 2.7R ohms
• Power Rating: 0.5 Watt (1/2W)
• Type: Metal Film Resistor
• Tolerance: ±1% (or as specified)
• Temperature Coefficient: ±50ppm/°C (typical for metal film resistors)
• Lead Diameter: Typically 0.6mm
• Body Size: Length ~6.3mm, Diameter ~2.3mm
• Operating Temperature Range: -55°C to +155°C
• Packaging: Usually in tape or bulk

Package:

5x 2.7R 0.5 Watt Metal Film Resistor 2.7R 1/2W MFR Resistor

• High-Performance Audio Amplifier: Designed for audio applications with high efficiency.
• Class D Technology: Provides efficient power conversion and low heat dissipation.
• Short-Circuit and Thermal Protection: Built-in safety features to protect against damage.

• Zero-Crossing Detection: Ensures efficient Triac triggering by detecting the zero-crossing point of AC voltage.
• Optocoupler Functionality: Isolates high-voltage components from low-voltage circuits to prevent damage.
• Triac Driver: Specifically designed for triggering Triacs in AC load control applications.

• Latching Operation: Stays in the position until pressed again, providing a reliable switch.
• NO (Normally Open) Contact Type: Ensures the circuit is open when the button is not pressed.
• Durable Material: Made from high-quality plastic and metal for longevity.
• Compact Size: Ideal for various applications with a mounting hole diameter of 12mm.