• High Current Handling: Supports a continuous drain current of 49A at 25°C.
• High Voltage Tolerance: Maximum Drain-Source Voltage (VDS) of 55V.
• Fast Switching Speed:
  • Rise time: 60ns
  • Fall time: 45ns

The UTC TDA2822 is a versatile monolithic integrated audio amplifier housed in an 8-pin plastic dual in-line package. Designed for portable cassette players and radios, it operates over a wide voltage range and features low crossover distortion, low quiescent current, and both bridge and stereo configurations.

• 32-Pin Package: Compact design with 32 pins for flexible integration.
• High Memory Capacity: 32KB Flash, 2KB SRAM, and 1KB EEPROM.
• Multiple I/O Lines: 23 General-purpose I/O lines for versatile connectivity.
• Analog and Digital Processing: 10-bit ADC with 8 channels for accurate analog signal processing.

• Function: Counter
• 4 Bits
• Technology Family: HC
• Input Type: Standard CMOS

• Voltage regulator for stable power supply
• Available for 12V and 24V input options
• 5W dissipation power
• Wide operating temperature range of 25°C to 75°C

• Compact and lightweight design for easy installation.
• Durable metal construction ensures long-lasting performance.
• Compatible with Micro USB Type B connectors.
• Ideal for DIY electronics and repair projects.

• Medium power transistor with hfe gain up to 50
• Improved linearity of hfe gain
• Maximum voltage across collector and emitter: 100V
• Maximum current allowed through collector: 3A DC

Specifications:

• Resistance : 100 Ohm
• Power Rating : 50W @ 25°C
• Max Voltage : 200V
• Tolerance : 5%
• Temperature Coefficient : 300ppm/°C
• Fixing Points : 2
• Body Length : 50mm
• Terminal Length : 11mm
• Height : 14mm
• Width : 27mm
• Distance Between Fixing Centers : 40mm x 20mm

Package:

1x Resistor

• 1-Wire® Interface – Unique communication system requiring only one port pin for data transmission.
• Unique Serial Code – Each sensor has a 64-bit serial code stored in onboard ROM for easy identification.
• Multidrop Capability – Simplifies distributed temperature sensing, allowing multiple devices on the same bus.
• No External Components Needed – The sensor operates without requiring any additional components.

• High-Quality Copper Clad Board for PCB prototyping.
• Single-Sided Design with copper coating on one side.
• Ideal for DIY PCB Making, Prototyping, and Electronics Projects.
• Standard Size: 6" x 4" (Approx. 150mm x 100mm).

• Low saturation voltage
• Simple drive requirements
• High safe operating area
• For low distortion complementary designs

• Resistance: 51KΩ
• Rated Power: 0.50W (500mW)
• Tolerance: 1%
• Metal film technology for high precision

• Contains a divide-by-two section and a divide-by-eight section
• Sections can be combined to form BCD, modulo-12, or modulo-16 counters
• Low power dissipation
• Operating temperature up to 70°C

• Logic Type: NOR/OR Gate
• Number of Circuits: 1
• Number of Inputs: 8
• Output Type: Single-Ended

• Ferrite core construction
• High inductance value of 560uH
• Radial lead design for easy PCB mounting
• Compact size ideal for space-saving applications

• Material: Made of PET (Polyethylene Terephthalate) for durability.
• Size: Approx. 29.6 x 21 cm (11.65 x 8.27 inches) for easy handling.
• Thickness: 0.12mm for optimal printing results.
• Transparency: 95% transparency, slightly frosted to prevent adhesion.