Specifications:

• Diameter Format: 1.75mm
• Print Temp.: 210-235℃
• Tolerance: ±0.02mm
• Print Speed： 50-100mm/s
• Platform Temp： Depends on the structure: No need or 60-80℃
• Length: 330m
• Tensile Strength: 11-15kgf
• Melt Flow Rate: 9-11g/10 min(190℃,2.16kg)
• Certificate: RoHS, Reach
• color: white

Recommend Settings:

• Nozzle/Extrusion temperature: 215-230℃(419-446℉);
• Bed/Platform temperature of 70-80℃(158-176℉);
• Printing speed: 30-60mm/s;
• These settings are for 0.4mm nozzle, it may be different with different diameters nozzle.

Please do 3 steps check if the filament can't stick to the build bed.

• Check Printing Temperature-Please check the temperature(bed and nozzle) settings before printing and set it suitable;
• Check Building Bed-Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed;
• Check Printing Speed-Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s).

Notes:

• Please insert the filament into the side holes after use to avoid tangles;
• Please store the 3D printer filament in a sealed bag or box after using it.