• Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 +
  • Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 +
  • Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 +
Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 +

Specifications:

  • Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
  • High signal-to-noise ratio (SNR)
  • Built-in 2D Dynamic Defect Pixel Correction (DPC)
  • Phase Detection Autofocus (PDAF) for rapid autofocus
  • QBC Re-mosaic function
  • HDR mode (up to 3 megapixel output)
  • CSI-2 serial data output
  • 2-wire serial communication (supports I2C fast mode and fast mode plus)
  • 2-wire serial control of focus mechanism
  • Resolution: 11.9 megapixels
  • Sensor size: 7.4mm sensor diagonal
  • Pixel size: 1.4μm × 1.4μm
  • Horizontal/vertical: 4608 × 2592 pixels
  • Diagonal field of view: 75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)
  • Common video modes: 1080p50, 720p100, 480p120
  • Output: RAW10
  • IR cut filter: Integrated in standard variants; not present in NoIR variants
  • Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
  • Ribbon cable length: 200mm
  • Cable connector: 15 × 1mm FPC

Documents:

Cable compatibility:
All models of Raspberry Pi Zero require a Raspberry Pi Zero camera cable to connect to the Raspberry Pi Camera Module;
the standard cable supplied with the camera is not compatible with the smaller Raspberry Pi Zero camera connector.
Suitable cables are available at low cost from many Raspberry Pi Approved Resellers, and are supplied with the Raspberry Pi Zero Case.

Compliance:
Raspberry Pi Camera Module 3 has undergone extensive compliance testing and meets a number of regional and international standards.

View and download relevant certificates and conformity documents.
If you require any further information regarding compliance, please contact us at [email protected].

Product Description

What is the Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5  ?

The "Raspberry Pi Camera Module 3 for Raspberry Pi Zero, 1, 2, 3, 4, 5 +" is a versatile camera module designed to be compatible with multiple models of Raspberry Pi single-board computers. It is specifically engineered to seamlessly integrate with Raspberry Pi Zero, 1, 2, 3, 4, and 5, providing users with a convenient imaging solution for various projects and applications.

This camera module features a high-quality back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor, ensuring excellent image quality and clarity. It comes equipped with advanced features such as Phase Detection Autofocus (PDAF) and built-in 2D Dynamic Defect Pixel Correction (DPC) for rapid autofocus and image correction.

With a resolution of 11.9 megapixels and support for various video modes, including 1080p50 and 720p100, the Camera Module 3 offers flexibility for capturing still images and videos in different scenarios.

The module is compact in size and includes a ribbon cable for easy connectivity to Raspberry Pi boards. However, it's important to note that for Raspberry Pi Zero models, a specific Raspberry Pi Zero camera cable is required for connection, as the standard cable supplied with the camera may not be compatible with the smaller Raspberry Pi Zero camera connector.

Overall, the Raspberry Pi Camera Module 3 for Raspberry Pi Zero, 1, 2, 3, 4, and 5 + is a versatile and high-performance camera module that expands the capabilities of Raspberry Pi boards, making it suitable for a wide range of applications, including photography, videography, surveillance, and machine vision.

How the Raspberry pi camera Module3 works?

The Raspberry Pi Camera Module 3 for Raspberry Pi Zero, 1, 2, 3, 4, and 5 + works by capturing images and videos using its integrated image sensor and processing them through the connected Raspberry Pi board. Here's how it works:

  1. Image Sensor: The camera module features a back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor. This sensor captures light and converts it into digital signals, forming images with high resolution and quality.

  2. Processing: The captured image data is processed by the Raspberry Pi board to perform tasks such as autofocus, white balance adjustment, and image enhancement. The board utilizes its processing power and software capabilities to optimize the captured images and videos.

  3. Connectivity: The camera module connects to the Raspberry Pi board via a ribbon cable. This cable transmits both power and data between the camera module and the board, enabling seamless communication and control.

  4. Control: The Raspberry Pi board controls various aspects of the camera module's operation, including capturing images, recording videos, adjusting settings, and processing the captured data. Users can interact with the camera module through software applications and programming interfaces provided by the Raspberry Pi operating system.

  5. Integration: The camera module integrates with the Raspberry Pi ecosystem, allowing users to incorporate it into their projects and applications. Whether it's for photography, videography, surveillance, or machine vision, the camera module expands the capabilities of Raspberry Pi boards and enables a wide range of creative possibilities.

Similar Products:

Infrared Led Light 5W 850 Raspberry Pi Camera Board Module Night-Vision Infrared IR

Raspberry Pi Camera Board - Night Vision "IR-CUT" (5MP)

Raspberry Pi Camera Module 5M REV 1.3

Raspberry Pi Camera Module V2 - 8 Megapixel, 1080p

Buy Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 + From ElectronicsBD Bangladesh (BD)

In Bangladesh, you can get the best Quality and original Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 + from ElectronicsBD. We have a large collection of the latest Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 + to purchase. Order online or visit our shop ElectronicsBD to get yours at the lowest price.

What is the latest and best price of Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 + in Bangladesh (BD) ?

The latest and special price of Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 + in Bangladesh is BDT ৳7,600.00 Taka. Buy best quality Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 + from ElectronicsBD at a special price in Bangladesh (BD). You can buy Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 + at best price from ElectronicsBD or visit ElectronicsBD Store. বাংলাদেশে আকর্ষণীয় মূল্যে কিনুন Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 + শুধুমাত্র ইলেকট্রনিক্স বিডি ElectronicsBD থেকে। ElectronicsBD বাংলাদেশের সকল প্রধান স্থান যেমন বরিশাল, চট্টগ্রাম, ঢাকা, খুলনা, রাজশাহী, রংপুর, ময়মনসিংহ এবং সিলেটে পণ্য ডেলিভারি করে ।

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Captcha
Digital Multimeter TRMS with Oscilloscope Portable LCD Colour 9999 Counts 10 MHz Mini Rechargeable Oscilloscope
-9%
TOOLTOP ET928 3 In 1 Oscilloscope Multimeter Signal Generator 12MHz 50Msps Portable High Storage Capacity Low Power Consumption
UNI-T UTD2025CL Digital Storage Oscilloscopes 2 Channels 250MSa/s Sample Rate 7''TFT LCD Scopemeter 100-240VAC
UNI-T UTD2052CEX Digital Storage Oscilloscopes 2CH 50MHZ 1Gsa Scope meter 7 inches widescreen LCD displays
UNI-T UTD2102CEX Digital Oscilloscope 100MHz Bandwidth With USB OTG Interface 2 Channels Storage Portable Oscilloscope
Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 +

Raspberry pi camera Module3 for Raspberry pi zero, 1, 2, 3, 4, 5 +

৳7,600.00