• LED Size: 5mm                                                                     
• Diode Color: IR / Infrared
• Lens Colour: Clear
• Wavelength: 940nm
• Transmission Modulation: 38kHz

• Supports 802.11 b/g/n WiFi
• Wi-Fi Direct (P2P) & Soft-AP functionality
• Integrated TCP/IP protocol stack for easy internet communication
• Built-in Power Management with low standby consumption.

Specifications:

• Working Voltage: DC 4V - 60V
• Trigger Signal Source:
  • High-Level Trigger: DC 3.0V-24V
  • Low-Level Trigger: DC 0.0V-0.6V
• Output Power:
  • Voltage: DC 4V-60V
  • Current: 10A at room temperature, up to 15A with additional heat dissipation
  • Power: 600W
• Signal Frequency Support: 0-2.5KHz
• Operating Temperature: -40°C to 85°C
• Size: 4.6 x 2.9 x 1.5 cm

Package:

1x High Power 600W MOS Tube FET Trigger Drive Module PWM Control High/Low Level Trigger Switch DC 4V-60V 5V 12V 24V

• High-precision TDS measurement for water quality testing.
• Compatible with Arduino and other microcontrollers for easy integration.
• Low power consumption with a working current of just 3-6mA.
• Wide measurement range from 0 to 1000ppm.

• Onboard TTP226 capacitive 8-button touch sensing IC
• Supports 8 touch buttons for versatile control applications
• 8-channel level status indicator for each key
• Adjustable working voltage: 2.4V - 5.5V

• Compact Design: Small 4.8cm x 1.8cm PCB for easy integration.
• Reliable Chipset: Uses ENC28J60/SS for stable performance.
• High-Speed Communication: Features a 25MHz crystal oscillator.
• SPI Interface: Ensures efficient data transfer with 3.3V power input.

• Designed for Arduino UNO R3 for easy expansion
• Supports multiple sensors, servos, relays, and modules
• Buckled ports for VCC, GND, and Output for easy connections
• Reset Button for quick board reset

• Wide operating voltage range (5V-12V)
• Low noise and AC ripple
• Supports various microphone types (electret, condenser, dynamic)
• Compact and lightweight design

• Supports Li-ion battery charging and boosting with 5V 2A output
• High charging efficiency with 96% discharge efficiency
• Compact and lightweight design for portable applications
• Wide operating temperature range (-20°C to +85°C)

• Input Voltage: AC 85 ~ 265V (50/60Hz) for wide compatibility.
• Output Voltage: DC 12V with a tolerance of ±0.2V.
• Output Current: 400mA.
• Power Output: 4.5W.

• Solid-State Relay (SSR): Offers fast and reliable switching for controlling high-voltage systems using low-voltage signals.
• Compact Size: Small and lightweight, making it easy to integrate into various applications.
• Low Trigger Voltage: Operates with an input signal voltage range of 0-1.5V for relay ON and 2.5-5V for relay OFF.
• Low Current Consumption: Very low trigger current (2mA) and quiescent current (0mA) for energy-efficient operation.

• Triple axis magnetometer for precise magnetic field measurement
• Small and compact size for easy integration into various projects
• I2C communication protocol for efficient data transfer

Specifications:

• MOSFET Model: LR7843
• Voltage Rating: 30V
• Current Rating: 161A
• Control Signal Voltage: Compatible with 3V or 5V
• Module Size: 23mm x 16mm
• Screw Holes: 2 x 2mm diameter
• Hole Spacing: 8mm

Package:

1 Module

Specifications:

• Sensing Voltage Range: 0 V to 26 V
• Power Supply Voltage: 2.7 V to 5.5 V
• Offset Voltage: ±80 µV (max)
• Gain Error: 0.25% (max)
• Configurable Averaging Options: Yes
• Programmable Addresses: Four
• Alert and Warning Outputs: Programmable
• Reporting: Shunt and Bus Voltage

Package:

1x Module

Specifications:

• Product Name: Essential LED Module for Hobbyist

• LED Colors: Blue, Red, Yellow, Green

• Compatible with: Arduino Uno, Arduino Nano, TTL, CMOS ICs

• Voltage Range: 5V to 12V (DC/AC)

• Maximum Current Sink/Source:

  • At 5V DC: 2.5 mA (when all LEDs are on)
  • At 12V DC: 11.6 mA (when all LEDs are on)

• Maximum Current Sink/Source (At 5V DC per LED):

  • Blue: 0.6 mA
  • Red: 1 mA
  • Yellow: 1.3 mA
  • Green: 0.3 mA

• Maximum Current Sink/Source (At 12V DC per LED):

  • Blue: 2.7 mA
  • Red: 3.6 mA
  • Yellow: 4.8 mA
  • Green: 1.3 mA

Package:

1x Module

• Simplifies design efforts, lowers system costs, and reduces design time.
• Converts platinum RTD resistance to digital values efficiently.
• Supports 100Ω to 1kΩ platinum RTDs (PT100 to PT1000).
• Compatible with 2-, 3-, and 4-wire sensor connections.

• LED Size: 5mm                                                                     
• Diode Color: IR / Infrared
• Lens Colour: Clear
• Wavelength: 940nm
• Transmission Modulation: 38kHz

• Supports 802.11 b/g/n WiFi
• Wi-Fi Direct (P2P) & Soft-AP functionality
• Integrated TCP/IP protocol stack for easy internet communication
• Built-in Power Management with low standby consumption.

Specifications:

• Working Voltage: DC 4V - 60V
• Trigger Signal Source:
  • High-Level Trigger: DC 3.0V-24V
  • Low-Level Trigger: DC 0.0V-0.6V
• Output Power:
  • Voltage: DC 4V-60V
  • Current: 10A at room temperature, up to 15A with additional heat dissipation
  • Power: 600W
• Signal Frequency Support: 0-2.5KHz
• Operating Temperature: -40°C to 85°C
• Size: 4.6 x 2.9 x 1.5 cm

Package:

1x High Power 600W MOS Tube FET Trigger Drive Module PWM Control High/Low Level Trigger Switch DC 4V-60V 5V 12V 24V

• High-precision TDS measurement for water quality testing.
• Compatible with Arduino and other microcontrollers for easy integration.
• Low power consumption with a working current of just 3-6mA.
• Wide measurement range from 0 to 1000ppm.

• Onboard TTP226 capacitive 8-button touch sensing IC
• Supports 8 touch buttons for versatile control applications
• 8-channel level status indicator for each key
• Adjustable working voltage: 2.4V - 5.5V