• 3D Printer StepStick DRV8825 Stepper Motor Driver
  • 3D Printer StepStick DRV8825 Stepper Motor Driver
  • 3D Printer StepStick DRV8825 Stepper Motor Driver
  • 3D Printer StepStick DRV8825 Stepper Motor Driver
3D Printer StepStick DRV8825 Stepper Motor Driver

Introduction:

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 features adjustable current limiting, over current and over temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).



Features:
 


  • Simple step and direction control interface
  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  • Can interface directly with 3.3 V and 5 V systems
  • Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
  • Short-to-ground and shorted-load protection
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Exposed solderable ground pad below the driver IC on the bottom of the PCB
  • Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  • 45 V maximum supply voltage
  • Built-in regulator (no external logic voltage supply needed)






 

Package: 1x 3D Printer StepStick DRV8825 Stepper Motor Driver

Product Description

Buy 3D Printer StepStick DRV8825 Stepper Motor Driver From ElectronicsBD Bangladesh (BD)

In Bangladesh, you can get the best Quality and original 3D Printer StepStick DRV8825 Stepper Motor Driver from ElectronicsBD. We have a large collection of the latest 3D Printer StepStick DRV8825 Stepper Motor Driver to purchase. Order online or visit our shop ElectronicsBD to get yours at the lowest price.

What is the latest and best price of 3D Printer StepStick DRV8825 Stepper Motor Driver in Bangladesh (BD) ?

The latest and special price of 3D Printer StepStick DRV8825 Stepper Motor Driver in Bangladesh is BDT ৳235.00 Taka. Buy best quality 3D Printer StepStick DRV8825 Stepper Motor Driver from ElectronicsBD at a special price in Bangladesh (BD). You can buy 3D Printer StepStick DRV8825 Stepper Motor Driver at best price from ElectronicsBD or visit ElectronicsBD Store. বাংলাদেশে আকর্ষণীয় মূল্যে কিনুন 3D Printer StepStick DRV8825 Stepper Motor Driver শুধুমাত্র ইলেকট্রনিক্স বিডি ElectronicsBD থেকে। ElectronicsBD বাংলাদেশের সকল প্রধান স্থান যেমন বরিশাল, চট্টগ্রাম, ঢাকা, খুলনা, রাজশাহী, রংপুর, ময়মনসিংহ এবং সিলেটে পণ্য ডেলিভারি করে ।

salam Salam23/12/2022

Product quality is good, no defects are founded....

Akm syeed 20/08/2022

ektu fast delivery dile valo hoto

Farhad Abbas29/07/2022

বাংলাদেশের মধ্যে অনেক ভালো একটা শপ আপনাদের।

Ibrahim Hossain 26/09/2021

One of the best e-shops in bangladesh, I think. They are really smart and they provide good service

Md Nasim 26/05/2021

valoi packing kora chilo ponno gulo

Write a review

Note: HTML is not translated!
Bad           Good
Captcha
3D Printer StepStick DRV8825 Stepper Motor Driver

3D Printer StepStick DRV8825 Stepper Motor Driver

৳235.00