3D Printer Components

• Length: 450 mm (closed-loop)
• Width: 6 mm
• Tooth Profile: GT2 (2mm pitch)
• Material: Rubber

• Length: 550 mm (closed-loop)
• Width: 6 mm
• Tooth Profile: GT2 (2mm pitch)
• Material: Rubber

• Length: 600 mm (closed-loop)
• Width: 6 mm
• Tooth Profile: GT2 (2mm pitch)
• Material: Rubber

• Material: Aluminum Alloy
• Number of Teeth: 80
• Inner Hole Diameter: 8mm
• Compatible Belt Width: Up to 7mm

• High-Quality Material: Made of die-cast aluminum for durability and strength
• Precise Design: Ensures accurate 90° right-angle fixing
• Versatile Application: Ideal for frame assembly, automation structures, and 4040 aluminum profiles
• Compact & Lightweight: Only 45g, making it easy to install

• High Current Capacity: Supports current up to 2A, ideal for high-performance applications
• Microstepping: Provides up to 1/256 microstepping for smooth and precise motor control
• Flexible Voltage: Works with a wide input voltage range from 5.5V to 28V
• Dual Mode Operation: DIR/STEP and UART modes for versatile control

• High-Quality Stainless Steel: Durable and rust-resistant optical axis for long-lasting performance
• Precision Engineering: Smooth linear motion for accurate positioning
• Versatile Application: Ideal for 3D printers, CNC machines, robotics, and automation projects
• Supports High Loads: Designed to handle high-speed motion with minimal friction

• High-quality PTFE material ensures smooth filament flow.
• 2mm inner diameter & 3mm outer diameter, perfect for 1.75mm filament.
• Heat-resistant and low friction, preventing clogs.
• Flexible and durable, suitable for long-term use.

• Square block design (H) for increased stability and load distribution.
• Heavy load capacity (C) designed for high-demand applications.
• Light preload (Z0) ensures minimal friction while maintaining performance.
• Self-alignment capability, reducing wear and improving longevity.

• Material: Made from high-quality aluminum, ensuring durability and strength.
• Inner Diameter: 6mm, designed to fit stepper motor shafts.
• Outer Diameter: 10mm, compatible with a variety of setups.
• Length: 25mm, ideal for tight spaces and small machinery.

• High-Quality Bearings: Ideal for use in 3D printers and other mechanical applications
• Deep Groove Design: Provides smooth operation with minimal friction
• Flanged Pulley Wheel: Ensures proper alignment and retention of the bearing in place
• Durable Material: Long-lasting and reliable for continuous use

• 4-layer PCB design for enhanced durability and reliability.
• Supports multiple stepper drivers: A4988, DRV8825, TMC2100, TMC2208, and TMC2130.
• 30A current support for power and heatbed terminals to prevent overheating.
• Easy SPI and STEP/DIR working mode selection for versatile configuration.

• Made of durable 45 Carbon Steel for long-lasting performance.
• Designed for use in 3D printer extruders for optimal functionality.
• Compact size with a height of 20mm, perfect for precise applications.
• Strong and resilient, providing consistent tension for smooth extrusion.

• Compatible with RAMPS 1.4 and 1.6 for 3D printers.
• 20x4 character LCD screen for real-time printing status display.
• Comes with an SD card slot for standalone printing.
• Plug-and-play design with easy installation.

• 3-inch LCD screen for 3D printers
• 128x64 resolution for clear and detailed display
• High brightness and adjustable contrast (6.0)
• Designed specifically for RepRap RAMPS1.4 3D printer setups

• Compatible with A4988 and DRV8825 stepper motor drivers
• Jumper position for selecting between 16 segments (A4988) or 32 segments (DRV8825)
• Allows for the connection of motor and power supply (5V and 12V-24V)
• Provides outputs for Enable, Step, Dir, and Ground (E, S, D, G) signals

• Simple step and direction control interface
• Supports six microstep resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
• Compatible with both 3.3V and 5V systems
• Over-temperature, over-current, and under-voltage protection

• Supports 3-axis stepper motor control
• Compatible with GRBL firmware for CNC engraving and laser engraving machines
• Works with Arduino Nano
• Supports 2A two-phase four-wire stepper motors

• Made of durable aluminum for long-lasting use
• Flexible design to accommodate slight misalignment between shafts
• Ideal for use with CNC stepper motors
• Silver color finish for a sleek, professional look

• Made of aluminum for enhanced durability
• Flexible design accommodates slight misalignment between shafts
• Perfect for CNC stepper motors
• Silver color finish for a sleek and professional look

• Designed for GT2 6mm synchronous belts
• Double flange for better grip and stability
• High precision for smooth operation
• Durable material for long-lasting use

• Designed for GT2 6mm synchronous belts
• Double flange for better grip and stability
• High precision for smooth operation
• Durable material for long-lasting use

• Made of high-quality aluminum for durability
• 40 teeth design minimizes belt slipping
• Compatible with 6mm and 7mm width belts
• High precision for smooth and stable operation

The Cyclone IV DE0-Nano Altera FPGA Starter Board is an essential tool for FPGA enthusiasts and developers. This versatile board comes with a comprehensive set of accessories, providing everything you need for your FPGA projects.

Key Features:

• Altera Cyclone IV FPGA (EP4CE22F17C6N)
• 22,320 Logic elements (LEs)
• 594 Embedded memory (Kbits)
• 66 Embedded 18 x 18 multipliers
• 4 General-purpose PLLs
• 153 Maximum FPGA I/O pins
• 50 MHz clock oscillator
• 8-channel 12-bit Analog/Digital converter (NS ADC128S022)
• 32 MB SDRAM
• On-board USB blaster programming interface
• 2Kb I2C EEPROM
• 4 DIP switches
• 8 Green LEDs
• ADXL345 3-axis Accelerometer
• Two 40-pin IDC-compatible headers provide 72 general purpose I/O pins
• One 26-pin header provides 16 digital I/O pins and 8 analog input pins for connecting to analog sensors

The 1-Digit 16-Segment Alphanumeric LED Display is perfect for a variety of display needs, offering high contrast light output and low current operation. Key features include:

• 0.8 inch character height
• Low current operation
• High contrast light output
• Easy mounting on PC boards or sockets
• Gray face with white segments

• Brand: Creality
• Type: PLA+ Filament
• Model: Ender-PLA+ 
• Filament Diameter(mm): 1.75
• Temperature: 190 - 230 Celsius
• Filaments Net Weight: 1kg

• High-quality PLA+ filament
• Filament diameter: 1.75mm
• Printing temperature: 190 - 230°C
• Tensile strength: 34MPa

The 2.4" TFT Touch Display for Arduino is an essential component for your Arduino projects. Designed for compatibility and ease of use, this touch display offers:

• High Resolution: 240×320 resolution with 18-bit (262,000) colors.
• SPFD5408 Controller: Built-in video RAM buffer for smooth performance.
• Digital Interface: 8-bit digital interface with 4 control lines.
• Pin Compatibility: Uses digital pins 5-13 and analog pins 0-3. Pin 12 is available if not using the microSD.
• Voltage Compatibility: Works with 3.3V or 5V logic.
• Backlight Control: 4 white LED backlights, on by default, with transistor control option.

Package includes:

• 1x 2.4" TFT Touch Display for Arduino

• Bi-metal design: Titanium alloy and copper
• High thermal strength for long-term work at 400℃
• Excellent thermal insulation with 0.2mm thickness
• Ra≤0.4 roughness for enhanced filament fluidity

• 1.3-inch HD IPS color screen
• Vivid colors, better than ordinary TFT LCD
• Resolution: 240x240 pixels
• Adjustable display direction: horizontal and vertical